Not all vendors dare to promise that if you fail the exam, we will give you a full refund. But our IT elite of Goldmile-Infobiz and our customers who are satisfied with our 200-301 Exam Course exam software give us the confidence to make such promise. It is our responsibility to relieve your pressure from preparation of 200-301 Exam Course exam. I will recommend our study materials to you. It can be said that our 200-301 Exam Course test prep greatly facilitates users, so that users cannot leave their homes to know the latest information. If you worry about your exam, our 200-301 Exam Course exam training dumps will guide you and make you well preparing，you will pass exam without any doubt.
CCNA 200-301 It means that it can support offline practicing.
Just only dozens of money on 200-301 - Cisco Certified Network Associate Exam Exam Course latest study guide will assist you 100% pass exam and 24-hours worm aid service. We believe that if you can learn about several advantages of 200-301 New Study Questions Files preparation questions, I believe you have more understanding of the real questions and answers. You can download the trial versions of the 200-301 New Study Questions Files exam questions for free.
Most returned customers said that our 200-301 Exam Course dumps pdf covers the big part of main content of the certification exam. Questions and answers from our 200-301 Exam Course free download files are tested by our certified professionals and the accuracy of our questions are 100% guaranteed. Please check the free demo of 200-301 Exam Course braindumps before purchased and we will send you the download link of 200-301 Exam Course real dumps after payment.
Cisco 200-301 Exam Course - So our product is a good choice for you.
With our 200-301 Exam Course practice test software, you can simply assess yourself by going through the 200-301 Exam Course practice tests. We highly recommend going through the 200-301 Exam Course answers multiple times so you can assess your preparation for the 200-301 Exam Course exam. Make sure that you are preparing yourself for the 200-301 Exam Course test with our practice test software as it will help you get a clear idea of the real 200-301 Exam Course exam scenario. By passing the exams multiple times on practice test software, you will be able to pass the real 200-301 Exam Course test in the first attempt.
If you opting for this 200-301 Exam Course study engine, it will be a shear investment. We never boost our achievements, and all we have been doing is trying to become more effective and perfect as your first choice, and determine to help you pass the 200-301 Exam Course preparation questions as efficient as possible.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
Forescout FSCP - So the proficiency of our team is unquestionable. Just to try on our ISQI CTFL-AcT training guide, and you will love it. EXIN CDCS - It will be easy for you to find your prepared learning material. Besides, you can have an experimental look of demos and get more information of Microsoft PL-300 real questions. Just come and have a try on our Pegasystems PEGACPBA24V1 study questions!
Updated: May 28, 2022