200-301 Exam Objectives learning materials have a variety of self-learning and self-assessment functions to test learning outcomes. 200-301 Exam Objectives study guide is like a tutor, not only gives you a lot of knowledge, but also gives you a new set of learning methods. 200-301 Exam Objectives exam practice is also equipped with a simulated examination system that simulates the real exam environment so that you can check your progress at any time. So please feel free to contact us if you have any trouble on our 200-301 Exam Objectives practice questions. We offer 24 - hour, 365 – day online customer service to every user on our 200-301 Exam Objectives study materials. If you encounter similar questions during the installation of the 200-301 Exam Objectives practice questions, our staffs will provide you with remote technical guidance.
CCNA 200-301 They compile each answer and question carefully.
CCNA 200-301 Exam Objectives - Cisco Certified Network Associate Exam According to the actual situation of all customers, we will make the suitable study plan for all customers. If you decide to buy and use the Latest Exam 200-301 Dumps Materials training materials from our company with dedication on and enthusiasm step and step, it will be very easy for you to pass the exam without doubt. We sincerely hope that you can achieve your dream in the near future by the Latest Exam 200-301 Dumps Materials latest questions of our company.
The first goal of our company is to help all people to pass the 200-301 Exam Objectives exam and get the related certification in the shortest time. Through years of concentrated efforts of our excellent experts and professors, our company has compiled the best helpful and useful 200-301 Exam Objectives test training materials to meet all people’s demands, and in addition, we can assure to everyone that our study materials have a higher quality than other study materials in the global market, at the same time, these people will be easier to be admitted to the human resources supervisor. The 200-301 Exam Objectives learn prep from our company has helped thousands of people to pass the exam and get the related certification, and then these people have enjoyed a better job and a better life.
Cisco 200-301 Exam Objectives - So you can have wide choices.
In order to make sure your whole experience of buying our 200-301 Exam Objectives prep guide more comfortable, our company will provide all people with 24 hours online service. The experts and professors from our company designed the online service system for all customers. If you decide to buy the 200-301 Exam Objectives study braindumps from our company, we can make sure that you will have the opportunity to enjoy the best online service provided by our excellent online workers. If you purchasing the 200-301 Exam Objectives test practice files designed by many experts and professors from our company, we can promise that our online workers are going to serve you day and night during your learning period. If you have any questions about our study materials, you can send an email to us, and then the online workers from our company will help you solve your problem in the shortest time. So do not hesitate to buy our 200-301 Exam Objectives prep guide.
We believe that our study materials will have the ability to help all people pass their 200-301 Exam Objectives exam and get the related exam in the near future. Our company have the higher class operation system than other companies, so we can assure you that you can start to prepare for the 200-301 Exam Objectives exam with our study materials in the shortest time.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 3
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 4
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 5
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
Through our investigation and analysis of the real problem over the years, our Palo Alto Networks NetSec-Analyst prepare questions can accurately predict the annual Palo Alto Networks NetSec-Analyst exams. In fact, our Microsoft PL-300 exam questions have helped tens of thousands of our customers successfully achieve their certification. If you want to progress and achieve their ideal life, if you are not satisfied with life now, if you still use the traditional methods by exam, so would you please choose the Huawei H21-287_V1.0 test materials, it will surely make you shine at the moment. We have three versions of our Microsoft AZ-900 exam braindumps: the PDF, the Software and the APP online. Our Cisco 300-815 training materials are designed to help users consolidate what they have learned, will add to the instant of many training, the user can test their learning effect in time after finished the part of the learning content, have a special set of wrong topics in our Cisco 300-815 guide dump, enable users to find their weak spot of knowledge in this function, iterate through constant practice, finally reach a high success rate.
Updated: May 28, 2022