Also, it needs to run on Java environment. If the computer doesn’t install JAVA, it will automatically download to ensure the normal running of the 200-301 Exam Papers study materials. What’s more, all computers you have installed our study materials can run normally. . The whole world of 200-301 Exam Papers preparation materials has changed so fast in the recent years because of the development of internet technology. The 200-301 Exam Papers practice questions that are best for you will definitely make you feel more effective in less time.
CCNA 200-301 You never know what you can get till you try.
Second, in terms of quality, we guarantee the authority of 200-301 - Cisco Certified Network Associate Exam Exam Papers study materials in many ways. Our 200-301 Answers Free exam torrent can help you overcome this stumbling block during your working or learning process. Under the instruction of our 200-301 Answers Free test prep, you are able to finish your task in a very short time and pass the exam without mistakes to obtain the Cisco certificate.
This is a very intuitive standard, but sometimes it is not enough comprehensive, therefore, we need to know the importance of getting the test 200-301 Exam Papers certification, qualification certificate for our future job and development is an important role. Only when we have enough qualifications to prove our ability can we defeat our opponents in the harsh reality. We believe our 200-301 Exam Papers actual question will help you pass the qualification examination and get your qualification certificate faster and more efficiently.
Cisco 200-301 Exam Papers - It can help you to pass the exam.
We learned that a majority of the candidates for the 200-301 Exam Papers exam are office workers or students who are occupied with a lot of things, and do not have plenty of time to prepare for the 200-301 Exam Papers exam. Taking this into consideration, we have tried to improve the quality of our 200-301 Exam Papers training materials for all our worth. Now, I am proud to tell you that our 200-301 Exam Papers study dumps are definitely the best choice for those who have been yearning for success but without enough time to put into it.
This process of learning left a deep impression on candidates. The exciting 200-301 Exam Papers exam material is a product created by professionals who have extensive experience in designing exam materials.
200-301 PDF DEMO:
QUESTION NO: 1
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 4
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
We can assure you that you will get the latest version of our ASQ CMQ-OE training materials for free from our company in the whole year after payment. After you purchase our Amazon DOP-C02 study guide, you can make the best use of your spare time to update your knowledge. The software of our Microsoft AI-900 test torrent provides the statistics report function and help the students find the weak links and deal with them. As a top selling product in the market, our Amazon SAP-C02 study guide has many fans. Our APICS CSCP-KR exam materials embrace much knowledge and provide relevant APICS CSCP-KR exam bank available for your reference, which matches your learning habits and produces a rich harvest of the APICS CSCP-KR exam knowledge.
Updated: May 28, 2022