Just remember that all your efforts will finally pay off. At present, our company has launched all kinds of 200-301 Exam Registration study materials, which almost covers all official tests. Every 200-301 Exam Registration exam questions are going through rigid quality check before appearing on our online stores. Just as exactly, to obtain the certification of 200-301 Exam Registration exam braindumps, you will do your best to pass the according exam without giving up. You may not have to take the trouble to study with the help of our 200-301 Exam Registration practice materials. If you buy the 200-301 Exam Registration exam dumps from our company, we can make sure that you will have the right to enjoy the 24 hours full-time online service.
CCNA 200-301 And we will let you down.
Our 200-301 - Cisco Certified Network Associate Exam Exam Registration study materials selected the most professional team to ensure that the quality of the 200-301 - Cisco Certified Network Associate Exam Exam Registration learning guide is absolutely leading in the industry, and it has a perfect service system. The learning of our Latest 200-301 Exam Materials study materials costs you little time and energy and we update them frequently. We can claim that you will be ready to write your exam after studying with our Latest 200-301 Exam Materials exam guide for 20 to 30 hours.
Perhaps our research data will give you some help. As long as you spend less time on the game and spend more time on learning, the 200-301 Exam Registration study materials can reduce your pressure so that users can feel relaxed and confident during the preparation and certification process. It is believed that many users have heard of the 200-301 Exam Registration study materials from their respective friends or news stories.
Cisco 200-301 Exam Registration - After all, no one can steal your knowledge.
All the IT professionals are familiar with the Cisco 200-301 Exam Registration exam. And all of you dream of owning the most demanding certification. So that you can get the career you want, and can achieve your dreams. With Goldmile-Infobiz's Cisco 200-301 Exam Registration exam training materials, you can get what you want.
We believe that the trial version will help you a lot. If you are not certain whether the 200-301 Exam Registration prep guide from our company is suitable for you or not, so you are hesitate to buy and use our study materials.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
CrowdStrike CCFA-200b - So that you can get the latest exam information in time. Huawei H19-404_V1.0 - If you have the Cisco certification, it will be very easy for you to get a promotion. Cisco 300-425 - After you use it, you will find that everything we have said is true. After you use our products, our VMware 250-614 study materials will provide you with a real test environment before the VMware 250-614 exam. HP HPE7-A07 - Missing the chance, I am sure you must regret it.
Updated: May 28, 2022