Countless 200-301 Exam Syllabus exam software users of our Goldmile-Infobiz let us have the confidence to tell you that using our test software, you will have the most reliable guarantee to pass 200-301 Exam Syllabus exam. With rapid development of IT industry, more and more requirements have been taken on those who are working in IT industry. So if you don't want to be eliminated in the competition, to pass 200-301 Exam Syllabus exam is a necessary for you. There are three different versions of our 200-301 Exam Syllabus preparation prep including PDF, App and PC version. Each version has the suitable place and device for customers to learn anytime, anywhere. Being qualified with Cisco certification will bring you benefits beyond your expectation.
CCNA 200-301 Quitters never win and winners never quit.
CCNA 200-301 Exam Syllabus - Cisco Certified Network Associate Exam Therefore, when you are ready to review the exam, you can fully trust our products, choose our learning materials. Our braindumps for 200-301 Test Questions Vce real exam are written to highest standard of technical profession, tested by our senior IT experts and certified trainers. You can totally trust our 200-301 Test Questions Vce exam prep materials because we guarantee the best quality of our products.
You also can become the lucky guys as long as you are willing to learn. And with our 200-301 Exam Syllabus exam materials, you will find that to learn something is also a happy and enjoyable experience, and you can be rewarded by the certification as well. Believe it or not, our 200-301 Exam Syllabus preparation questions will relieve you from poverty.
Cisco 200-301 Exam Syllabus - In every area, timing counts importantly.
Goldmile-Infobiz's Cisco 200-301 Exam Syllabus exam training materials is the best training materials. If you are an IT staff, it will be your indispensable training materials. Do not take your future betting on tomorrow. Goldmile-Infobiz's Cisco 200-301 Exam Syllabus exam training materials are absolutely trustworthy. We are dedicated to provide the materials to the world of the candidates who want to participate in IT exam. To get the Cisco 200-301 Exam Syllabus exam certification is the goal of many IT people & Network professionals. The pass rate of Goldmile-Infobiz is incredibly high. We are committed to your success.
People who can contact with your name, e-mail, telephone number are all members of the internal corporate. The privacy information provided by you only can be used in online support services and providing professional staff remote assistance.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
At present, Cisco SAP C-CPI-2506 exam is very popular. The results of your HP HPE3-CL07 exam will be analyzed and a statistics will be presented to you. Cisco 200-301-KR - As long as you master these questions and answers, you will sail through the exam you want to attend. Amazon AWS-Developer - You can see the demo, the form of the software and part of our titles. Cisco 350-501 - Working in the IT industry, don't you feel pressure? Educational level is not representative of your strength.
Updated: May 28, 2022