If you have any questions about our 200-301 Exam Test study questions, you have the right to answer us in anytime. Our online workers will solve your problem immediately after receiving your questions. Our 200-301 Exam Test preparation exam can provide all customers with the After-sales service guarantee. After decades of hard work, our products are currently in a leading position in the same kind of education market, our 200-301 Exam Test learning materials, with their excellent quality and constantly improved operating system, In many areas won the unanimous endorsement of many international customers. Advanced operating systems enable users to quickly log in and use, in constant practice and theoretical research, our 200-301 Exam Test learning materials have come up with more efficient operating system to meet user needs, so we can assure users here , after user payment , users can perform a review of the 200-301 Exam Test exam in real time , because our advanced operating system will immediately send users 200-301 Exam Test learning material to the email address where they are paying , this greatly facilitates the user, lets the user be able to save more study time. It is difficult to get the 200-301 Exam Test certification for you need have extremely high concentration to have all test sites in mind.
CCNA 200-301 While it is not truth.
Goldmile-Infobiz is a website which can help you save time and energy to rapidly and efficiently master the Cisco certification 200-301 - Cisco Certified Network Associate Exam Exam Test exam related knowledge. About choosing the perfect Latest 200-301 Exam Passing Score study material, it may be reflected in matters like quality, prices, after-sale services and so on. Latest 200-301 Exam Passing Score exam simulation is accumulation of knowledge about the exam strictly based on the syllabus of the exam.
Feedbacks of many IT professionals who have passed Cisco certification 200-301 Exam Test exam prove that their successes benefit from Goldmile-Infobiz's help. Goldmile-Infobiz's targeted test practice questions and answers to gave them great help, which save their valuable time and energy, and allow them to easily and smoothly pass their first Cisco certification 200-301 Exam Test exam. So Goldmile-Infobiz a website worthy of your trust.
Cisco Cisco 200-301 Exam Test exam is a Technical Specialist exam.
Learning knowledge is not only to increase the knowledge reserve, but also to understand how to apply it, and to carry out the theories and principles that have been learned into the specific answer environment. The Cisco Certified Network Associate Exam exam dumps are designed efficiently and pointedly, so that users can check their learning effects in a timely manner after completing a section. Good practice on the success rate of 200-301 Exam Test quiz guide is not fully indicate that you have mastered knowledge is skilled, therefore, the 200-301 Exam Test test material let the user consolidate learning content as many times as possible, although the practice seems very boring, but it can achieve the result of good consolidate knowledge.
Here, I have to recommend Goldmile-Infobiz's Cisco 200-301 Exam Test exam training materials. The purchase rate and favorable reception of this material is highest on the internet.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 3
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 4
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 5
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
Our system provides safe purchase procedures to the clients and we guarantee the system won’t bring the virus to the clients’ computers and the successful payment for our HP HPE2-W12 learning file. HP HPE3-CL08 - Goldmile-Infobiz will provide you with the best training materials, and make you pass the exam and get the certification. Microsoft AZ-400 - So it will never appear flash back. VMware 250-614 - Cisco certification has been well recognized by international community. Perhaps you worry about the quality of our HP HPE6-A87 exam questions.
Updated: May 28, 2022