Our 200-301 Level Test training materials are professional practice material under warranty. Accompanied with acceptable prices for your reference, all our 200-301 Level Test exam quiz with three versions are compiled by professional experts in this area more than ten years long. Moreover, there are a series of benefits for you. In preparing the 200-301 Level Test qualification examination, the 200-301 Level Test study materials will provide users with the most important practice materials. Users can evaluate our products by downloading free demo templates prior to formal purchase. More importantly, our commitment to help you become 200-301 Level Test certified does not stop in buying our products.
CCNA 200-301 We sincerely offer you 24/7 online service.
CCNA 200-301 Level Test - Cisco Certified Network Associate Exam I believe that people want to have good prospects of career whatever industry they work in. If only you open it in the environment with the network for the first time you can use our New 200-301 Exam Sample Questions training materials in the off-line condition later. It depends on the client to choose the version they favor to learn our New 200-301 Exam Sample Questions study materials.
In Goldmile-Infobiz's website you can free download study guide, some exercises and answers about Cisco certification 200-301 Level Test exam as an attempt.
Cisco 200-301 Level Test - Within a year, we provide free updates.
Our 200-301 Level Test test braindumps are in the leading position in the editorial market, and our advanced operating system for 200-301 Level Test latest exam torrent has won wide recognition. As long as you choose our 200-301 Level Test exam questions and pay successfully, you do not have to worry about receiving our learning materials for a long time. We assure you that you only need to wait 5-10 minutes and you will receive our 200-301 Level Test exam questions which are sent by our system. When you start learning, you will find a lot of small buttons, which are designed carefully. You can choose different ways of operation according to your learning habits to help you learn effectively.
This is the achievement made by IT experts in Goldmile-Infobiz after a long period of time. They used their knowledge and experience as well as the ever-changing IT industry to produce the material.
200-301 PDF DEMO:
QUESTION NO: 1
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 4
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
You will our Microsoft MB-700 exam dumps are the best! If you are still study hard to prepare the Cisco Snowflake SOL-C01 exam, you're wrong. You can also know how to contact us and what other client’s evaluations about our VMware 2V0-16.25 test braindumps. If you are concerned about the test, however, you can choose Goldmile-Infobiz's Cisco Microsoft AZ-801 exam training materials. ACAMS CAMS7-CN - The procedure of refund is very simple.
Updated: May 28, 2022