There are free demos giving you basic framework of 200-301 Practice Questions training materials. All are orderly arranged in our 200-301 Practice Questions practice materials. After all high-quality demos rest with high quality 200-301 Practice Questions preparation materials, you can feel relieved with help from then. People around the world prefer 200-301 Practice Questions exam certification to make their careers more strengthened and successful. In Goldmile-Infobiz, you can choose the products which are suitable for your learning ability to learn. Our 200-301 Practice Questions guide questions are motivating materials especially suitable for those exam candidates who are eager to pass the exam with efficiency.
CCNA 200-301 Action always speaks louder than words.
CCNA 200-301 Practice Questions - Cisco Certified Network Associate Exam If you're still catching your expertise to prepare for the exam, then you chose the wrong method. Continuous improvement is a good thing. If you keep making progress and transcending yourself, you will harvest happiness and growth.
With this certification you will not be eliminated, and you will be a raise. Some people say that to pass the Cisco 200-301 Practice Questions exam certification is tantamount to success. Yes, this is true.
Cisco 200-301 Practice Questions - So, it can save much time for us.
Our 200-301 Practice Questions study guide is carefully edited and reviewed by our experts. The design of the content conforms to the examination outline and its key points. Through the practice of our 200-301 Practice Questions exam questions, you can grasp the intention of the examination organization accurately. And we also have the Software version of our 200-301 Practice Questions learning materials that can simulate the real exam which can help you better adapt to the real exam.
Goldmile-Infobiz Cisco 200-301 Practice Questions pdf dumps are the most credible. The exam dumps is rare certification training materials which are researched by IT elite.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 3
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 4
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
In addition, the passing rate of our ASQ CSSBB study materials is very high, and we are very confident to ensure your success. And then are what materials your worthwhile option? Do you have chosen Goldmile-Infobiz Cisco IBM S2000-025 real questions and answers? If so, you don't need to worry about the problem that can't pass the exam. Amazon SAA-C03-KR - In order to meet the demands of all people, these excellent experts and professors from our company have been working day and night. Microsoft DP-300 - So what we can do is to help you not waste your efforts on the exam preparation. Snowflake GES-C01 - Free demos are understandable materials as well as the newest information for your practice.
Updated: May 28, 2022