Experts at 200-301 Practice Test practice prep also fully considered this point. With regard to the Internet, if you use our 200-301 Practice Test study materials in a network environment, then you can use our products in a non-network environment. 200-301 Practice Test learning guide guarantee that you can make full use of all your free time to learn, if you like. Goldmile-Infobiz's Cisco 200-301 Practice Test exam training material includes all the knowledge that must be mastered for the purpose of passing the Cisco 200-301 Practice Test exam. Goldmile-Infobiz's Cisco 200-301 Practice Test exam training materials are bring the greatest success rate to all the candicates who want to pass the exam. Many of our users have told us that they are really busy.
CCNA 200-301 There is no reason to waste your time on a test.
And i can say no people can know the 200-301 - Cisco Certified Network Associate Exam Practice Test exam braindumps better than them since they are the most professional. Moreover, the colleagues and the friends with IT certificate have been growing. In this case, if you have none, you will not be able to catch up with the others.
Under coordinated synergy of all staff, our 200-301 Practice Test guide materials achieved to a higher level of perfection by keeping close attention with the trend of dynamic market. They eliminated stereotypical content from our 200-301 Practice Test practice materials. And if you download our 200-301 Practice Test study quiz this time, we will send free updates for you one year long since we promise that our customers can enjoy free updates for one year.
Cisco 200-301 Practice Test - Contact us quickly.
It is the best choice to accelerate your career by getting qualified by 200-301 Practice Test certification. Goldmile-Infobiz provides the most updated and accurate 200-301 Practice Test study pdf for clearing your actual test. The quality of 200-301 Practice Test practice training torrent is checked by our professional experts. The high pass rate and high hit rate of Cisco pdf vce can ensure you 100% pass in the first attempt. What’s more, if you fail the 200-301 Practice Test test unfortunately, we will give you full refund without any hesitation.
Many jobs are replaced by intelligent machines. You must learn practical knowledge such as our 200-301 Practice Test actual test guide, which cannot be substituted by artificial intelligence.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 5
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
You can check out the interface, question quality and usability of our Microsoft PL-200 practice exams before you decide to buy it. Pegasystems PEGACPDS25V1 - Then you don't have to spend extra time searching for information when you're facing other exams later, just choose us again. Huawei H13-922_V2.0 - You will free access to our test engine for review after payment. Because of not having appropriate review methods and review materials, or not grasping the rule of the questions, so many candidates eventually failed to pass the Amazon SAA-C03-KR exam even if they have devoted much effort. Each question in Microsoft MS-900 pass guide is certified by our senior IT experts to improve candidates' ability and skills.
Updated: May 28, 2022