It is a virtual certainty that our 200-301 Questions Ebook actual exam is high efficient with passing rate up to 98 percent and so on. We made it by persistence, patient and enthusiastic as well as responsibility. Moreover, about some tricky problems of 200-301 Questions Ebook exam materials you do not to be anxious and choose to take a detour, our experts left notes for your reference. Just a small amount of money, but you can harvest colossal success with potential bright future. So we have the courage and justification to declare the number one position in this area, and choosing 200-301 Questions Ebook actual exam is choosing success. The more time you spend in the preparation for 200-301 Questions Ebook training materials, the higher possibility you will pass the exam.
CCNA 200-301 You will like the software version.
CCNA 200-301 Questions Ebook - Cisco Certified Network Associate Exam It's never too late to know it from now on. If the user is still unsure which is best for him, consider applying for a free trial of several different types of test materials. It is believed that through comparative analysis, users will be able to choose the most satisfactory Exam 200-301 Questions And Answers test guide.
And this version also helps establish the confidence of the candidates when they attend the 200-301 Questions Ebook exam after practicing. Because of the different habits and personal devices, requirements for the version of our 200-301 Questions Ebook exam questions vary from person to person. To address this issue, our 200-301 Questions Ebook actual exam offers three different versions for users to choose from.
Cisco 200-301 Questions Ebook - Perhaps this is the beginning of your change.
Many exam candidates feel hampered by the shortage of effective 200-301 Questions Ebook preparation quiz, and the thick books and similar materials causing burden for you. Serving as indispensable choices on your way of achieving success especially during this 200-301 Questions Ebook exam, more than 98 percent of candidates pass the exam with our 200-301 Questions Ebook training guide and all of former candidates made measurable advance and improvement.
Therefore, modern society is more and more pursuing efficient life, and our 200-301 Questions Ebook exam materials are the product of this era, which conforms to the development trend of the whole era. It seems that we have been in a state of study and examination since we can remember, and we have experienced countless tests, including the qualification examinations we now face.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
The PDF version of Fortinet FCSS_SDW_AR-7.4 test questions can be printed out to facilitate your learning anytime, anywhere, as well as your own priorities. Our Huawei H19-404_V1.0 practical material is a learning tool that produces a higher yield than the other. ACAMS CAMS7-CN - You are only supposed to practice Cisco Certified Network Associate Exam guide torrent for about 20 to 30 hours before you are fully equipped to take part in the examination. Workday Workday-Pro-Integrations - Of course, their service attitude is definitely worthy of your praise. You can learn about the usage and characteristics of our Huawei H20-614_V1.0 learning guide in various trial versions, so as to choose one of your favorite in formal purchase.
Updated: May 28, 2022