Besides, we will always accompany you during the 200-301 Questions Explanations exam preparation, so if you have any doubts, please contact us at any time. Hope you achieve good result in the 200-301 Questions Explanations real test. Goldmile-Infobiz is the trustworthy platform for you to get the reference study material for 200-301 Questions Explanations exam preparation. So do not hesitate and hurry to buy our study materials. As is known to us, our company has promised that the 200-301 Questions Explanations exam braindumps from our company will provide more than 99% pass guarantee for all people who try their best to prepare for the exam. If you are interested in Soft test engine of 200-301 Questions Explanations practice questions, you should know below information better.
CCNA 200-301 Life needs to be colorful and meaningful.
We will offer you the best preparation materials regarding 200-301 - Cisco Certified Network Associate Exam Questions Explanations practice exam. There are a lot of IT experts in our company, and they are responsible to update the contents every day. If you decide to buy our Valid 200-301 Exam Bootcamp Materials study question, we can promise that we will send you the latest information every day.
What’s more, you will enjoy one year free update after purchase of 200-301 Questions Explanations practice cram. Dear candidates, pass your test with our accurate & updated 200-301 Questions Explanations training tools. As we all know, the well preparation will play an important effect in the 200-301 Questions Explanations actual test.
Cisco 200-301 Questions Explanations - You can learn anytime, anywhere.
There is no another great way to pass the Cisco 200-301 Questions Explanations exam in the first attempt only by doing a selective study with valid 200-301 Questions Explanations braindumps. If you already have a job and you are searching for the best way to improve your current 200-301 Questions Explanations test situation, then you should consider the 200-301 Questions Explanations exam dumps. By using our updated 200-301 Questions Explanations products, you will be able to get reliable and relative 200-301 Questions Explanations exam prep questions, so you can pass the exam easily. You can get one-year free 200-301 Questions Explanations exam updates from the date of purchase.
At the fork in the road, we always face many choices. When we choose job, job are also choosing us.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
And our practice materials also have a statistical analysis function to help you find out the deficiency in the learning process of IIA IIA-CIA-Part3-CN practice materials, so that you can strengthen the training for weak links. You can imagine this is a great set of ACAMS CAMS-KR learning guide! In fact, you just need spend 20~30h effective learning time if you match CIPS L5M1 guide dumps and listen to our sincere suggestions. ACAMS CAMS - We have made all efforts to update our product in order to help you deal with any change, making you confidently take part in the exam. Our experts are working hard on our Juniper JN0-650 exam questions to perfect every detail in our research center.
Updated: May 28, 2022