The APP online version of our 200-301 Questions Pdf real exam boosts no limits for the equipment being used and it supports any electronic equipment and the off-line use. If only you open it in the environment with the network for the first time you can use our 200-301 Questions Pdf training materials in the off-line condition later. It depends on the client to choose the version they favor to learn our 200-301 Questions Pdf study materials. In Goldmile-Infobiz's website you can free download study guide, some exercises and answers about Cisco certification 200-301 Questions Pdf exam as an attempt. If you purchase our 200-301 Questions Pdf practice materials, we believe that your life will get better and better.
You will our 200-301 Questions Pdf exam dumps are the best!
CCNA 200-301 Questions Pdf - Cisco Certified Network Associate Exam Now this is the age of the Internet, there are a lot of shortcut to success. You can also know how to contact us and what other client’s evaluations about our Valid 200-301 Exam Questions test braindumps. The pages of our product also provide other information about our product and the exam.
And you can pass the exam successfully. Education degree does not equal strength, and it does not mean ability. Education degree just mean that you have this learning experience only.
Cisco 200-301 Questions Pdf - It means that it can support offline practicing.
Do you want to double your salary in a short time? Yes, it is not a dream. Our 200-301 Questions Pdf latest study guide can help you. IT field is becoming competitive; a Cisco certification can help you do that. If you get a certification with our 200-301 Questions Pdf latest study guide, maybe your career will change. A useful certification will bring you much outstanding advantage when you apply for any jobs about Cisco company or products. Just only dozens of money on 200-301 Questions Pdf latest study guide will assist you 100% pass exam and 24-hours worm aid service.
You can download the trial versions of the 200-301 Questions Pdf exam questions for free. After using the trial version of our 200-301 Questions Pdf study materials, I believe you will have a deeper understanding of the advantages of our 200-301 Questions Pdf training engine.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
Please check the free demo of CIPS L5M1 braindumps before purchased and we will send you the download link of CIPS L5M1 real dumps after payment. We will contact the user to ensure that they fully understand the user's situation, including their own level, available learning time on Huawei H20-614_V1.0 training questions. The efficiency and accuracy of our IAPP CIPP-E learning guide will not let you down. For security, you really need to choose an authoritative product like our HP HPE3-CL06 learning braindumps. Goldmile-Infobiz Microsoft SC-300 exam preparation begins and ends with your accomplishing this credential goal.
Updated: May 28, 2022