You can practice online anytime and check your test history and performance review, which will do help to your study. The second is 200-301 Real Exams Desktop Test Engine. As an installable 200-301 Real Exams software application, it simulated the real 200-301 Real Exams exam environment, and builds 200-125 exam confidence. You can consult online no matter what problems you encounter. You can get help anywhere, anytime in our 200-301 Real Exams test material. But we guarantee to you if you fail in we will refund you in full immediately and the process is simple.
CCNA 200-301 It will be a first step to achieve your dreams.
Up to now our 200-301 - Cisco Certified Network Associate Exam Real Exams practice materials account for 60 percent of market share in this line for their efficiency and accuracy when dealing with the exam. So there is nothing to worry about, just buy our 200-301 New Exam Guide Materials exam questions. It is our consistent aim to serve our customers wholeheartedly.
We have tens of thousands of supporters around the world eager to pass the exam with our 200-301 Real Exams learning guide which are having a steady increase on the previous years. Exam candidates around the world are longing for learning from our practice materials. If you want to have an outline and brief understanding of our 200-301 Real Exams preparation materials we offer free demos for your reference.
Cisco 200-301 Real Exams - You must seize the good chances when it comes.
Our company has a professional team of experts to write 200-301 Real Exams preparation materials and will constantly update it to ensure that it is synchronized with the exam content. In addition to the high quality, reasonable price and so on, we have many other reasons to make you choose our 200-301 Real Exams actual exam. There are three versions of our 200-301 Real Exams exam questions: PDF, Software and APP online which can provide you the varied study experiences.
So you must act from now. As we all know, time and tide wait for no man.
200-301 PDF DEMO:
QUESTION NO: 1
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 4
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
Do not have enough valid Juniper JN0-460 practice materials, can bring inconvenience to the user, such as the delay progress, learning efficiency and to reduce the learning outcome was not significant, these are not conducive to the user persistent finish learning goals. CompTIA 220-1101 - It will play a multiplier effect to help you pass the exam. Our VMware 2V0-17.25 test questions are compiled by domestic first-rate experts and senior lecturer and the contents of them contain all the important information about the test and all the possible answers of the questions which maybe appear in the test. Now you can free download part of practice questions and answers of Cisco certification APICS CPIM-8.0 exam on Goldmile-Infobiz. Oracle 1z0-1065-25 - As long as you never abandon yourself, you certainly can make progress.
Updated: May 28, 2022