If you decide to buy the 200-301 Sheet File study braindumps from our company, we can make sure that you will have the opportunity to enjoy the best online service provided by our excellent online workers. If you purchasing the 200-301 Sheet File test practice files designed by many experts and professors from our company, we can promise that our online workers are going to serve you day and night during your learning period. If you have any questions about our study materials, you can send an email to us, and then the online workers from our company will help you solve your problem in the shortest time. We believe that our study materials will have the ability to help all people pass their 200-301 Sheet File exam and get the related exam in the near future. Our company have the higher class operation system than other companies, so we can assure you that you can start to prepare for the 200-301 Sheet File exam with our study materials in the shortest time. Through our investigation and analysis of the real problem over the years, our 200-301 Sheet File prepare questions can accurately predict the annual 200-301 Sheet File exams.
CCNA 200-301 They will help you 24/7 all the time.
Just look at the comments on the 200-301 - Cisco Certified Network Associate Exam Sheet File training guide, you will know that how popular they are among the candidates. We have free demos of our 200-301 Reliable Exam Registration exam questions for your information and the demos offer details of real exam contents. All contents of 200-301 Reliable Exam Registration practice quiz contain what need to be mastered.
Presiding over the line of our practice materials over ten years, our experts are proficient as elites who made our 200-301 Sheet File learning questions, and it is their job to officiate the routines of offering help for you. All points are predominantly related with the exam ahead of you. You will find the exam is a piece of cake with the help of our 200-301 Sheet File study materials.
Cisco 200-301 Sheet File - Goldmile-Infobiz is worthful to choose.
The 200-301 Sheet File certification exam is essential for future development, and the right to a successful 200-301 Sheet File exam will be in your own hands. As long as you pass the exam, you will take a step closer to your goal. However, unless you have updated 200-301 Sheet File exam materials, or passing the exam's mystery is quite challenging. Thousands of people tried the 200-301 Sheet File exams, but despite having good professional experience and being well-prepared, the regrettable exam failed. One of the main reasons for the failure may be that since practice and knowledge alone are not enough, people need to practice our Goldmile-Infobiz 200-301 Sheet File exam materials, otherwise they cannot escape reading. Well, you are in the right place. The 200-301 Sheet File questions on our Goldmile-Infobiz are one of the most trustworthy questions and provide valuable information for all candidates who need to pass the 200-301 Sheet File exam.
About the 200-301 Sheet File exam certification, reliability can not be ignored. 200-301 Sheet File exam training materials of Goldmile-Infobiz are specially designed.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
Databricks Databricks-Certified-Professional-Data-Engineer - We can make sure that it will be very easy for you to pass your exam and get the related certification in the shortest time that beyond your imagination. With Goldmile-Infobiz's Cisco IBM C1000-200 exam training materials you can pass the Cisco IBM C1000-200 exam easily. Pegasystems PEGACPDS25V1 - So just open our websites in your computer. CIPS L5M5 - It not only can help you to pass the exam , you can also improve your knowledge and skills. Huawei H19-172_V1.0 - You can find their real comments in the comments sections.
Updated: May 28, 2022