The high quality of our products also embodies in its short-time learning. You are only supposed to practice 200-301 Simulator Free study materials for about 20 to 30 hours before you are fully equipped to take part in the examination. Our 200-301 Simulator Free study materials are the hard-won fruit of our experts with their unswerving efforts in designing products and choosing test questions. Of course, before you buy, 200-301 Simulator Free certification training offers you a free trial service, as long as you log on our website, you can download our trial questions bank for free. I believe that after you try 200-301 Simulator Free certification training, you will love them. Purchasing products of Goldmile-Infobiz you can easily obtain Cisco certification and so that you will have a very great improvement in IT area.
CCNA 200-301 All people dream to become social elite.
CCNA 200-301 Simulator Free - Cisco Certified Network Associate Exam Because this is a small investment in exchange for a great harvest. The pass rate is the test of a material. Such a high pass rate is sufficient to prove that New APP 200-301 Simulations guide materials has a high quality.
Add Goldmile-Infobiz's products to cart now! You will have 100% confidence to participate in the exam and disposably pass Cisco certification 200-301 Simulator Free exam. At last, you will not regret your choice.
Cisco 200-301 Simulator Free - If you don't pass, we won't earn you any money.
If you are interested in Goldmile-Infobiz's training program about Cisco certification 200-301 Simulator Free exam, you can first on Goldmile-Infobiz to free download part of the exercises and answers about Cisco certification 200-301 Simulator Free exam as a free try. We will provide one year free update service for those customers who choose Goldmile-Infobiz's products.
Because the 200-301 Simulator Free study materials from our company are very useful for you to pass the exam and get the certification. We have to admit that the exam of gaining the 200-301 Simulator Free certification is not easy for a lot of people, especial these people who have no enough time.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 3
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 4
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
CIPS L5M8 - Our resources are constantly being revised and updated, with a close correlation. SAP C-ARP2P-2508 - We are now engaged in the pursuit of Craftsman spirit in all walks of life. With the Goldmile-Infobiz of Cisco IIA IIA-CIA-Part2-KR exam materials, I believe that your tomorrow will be better. CrowdStrike CCFA-200b - As old saying goes, knowledge is wealth. We Goldmile-Infobiz Cisco Microsoft DP-300 exam training materials in full possession of the ability to help you through the certification.
Updated: May 28, 2022