All your worries can be wiped out because our 200-301 Study Dumps learning quiz is designed for you. We hope that that you can try our free trials before making decisions. As the leader in the market for over ten years, our 200-301 Study Dumps practice engine owns a lot of the advantages. While our 200-301 Study Dumps training guide is beneficiary even you lose your chance of winning this time. Our website offer considerate 24/7 services with non-stopping care for you after purchasing our 200-301 Study Dumps learning materials. Besides, the software version can simulate the real test environment, which is favorable for people to better adapt to the examination atmosphere.
CCNA 200-301 It can maximize the efficiency of your work.
CCNA 200-301 Study Dumps - Cisco Certified Network Associate Exam We can make sure that it will be very easy for you to pass your exam and get the related certification in the shortest time that beyond your imagination. You only need to download the Goldmile-Infobiz Cisco Dumps 200-301 Torrent exam training materials, namely questions and answers, the exam will become very easy. Goldmile-Infobiz guarantee that you will be able to pass the exam.
You can apply for many types of 200-301 Study Dumps exam simulation at the same time. Once our system receives your application, it will soon send you what you need. Please ensure you have submitted the right email address.
Cisco 200-301 Study Dumps - It can help you to pass the exam successfully.
Do you have tried the 200-301 Study Dumps online test engine? Here we will recommend the 200-301 Study Dumps online test engine offered by Goldmile-Infobiz for all of you. Firstly, 200-301 Study Dumps online training can simulate the actual test environment and bring you to the mirror scene, which let you have a good knowledge of the actual test situation. Secondly, the 200-301 Study Dumps online practice allows self-assessment, which can bring you some different experience during the preparation. You can adjust your 200-301 Study Dumps study plan according to the test result after each practice test.
Goldmile-Infobiz allows you to have a bright future. And allows you to work in the field of information technology with high efficiency.
200-301 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 2
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 3
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 4
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 5
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
SAP C-BCBAI-2509 - If this is what you want, why are you still hesitating? To pass the Cisco Amazon SAA-C03-KR exam is a dream who are engaged in IT industry. Linux Foundation CKS - We have statistics to tell you the truth. It has the best training materials, which is Goldmile-Infobiz;s Cisco CIPS L5M1 exam training materials. Beyond knowing the answer, and actually understanding the EMC D-PSC-DS-01 test questions puts you one step ahead of the test.
Updated: May 28, 2022