Sometimes, you must decisively abandon some trivial things, and then you can harvest happiness and fortunes. Now, our 200-301 Study Guide guide materials just need to cost you less spare time, then you will acquire useful skills which may help you solve a lot of the difficulties in your job. Besides, our 200-301 Study Guide exam questions will help you pass the exam and get the certification for sure. You do not need to run the risk of losing money in case of failure of 200-301 Study Guide test. You can require for money back according to our policy. Goldmile-Infobiz 100% guarantee you to pass Cisco certification 200-301 Study Guide exam.
CCNA 200-301 it can help you to pass the IT exam.
On one hand, these free updates can greatly spare your money since you have the right to free download 200-301 - Cisco Certified Network Associate Exam Study Guide real dumps as long as you need to. Everyone has the potential to succeed, the key is what kind of choice you have. Only to find ways to success, do not make excuses for failure.
In such a way, you can confirm that you get the convenience and fast. By studying with our 200-301 Study Guide real exam for 20 to 30 hours, we can claim that you can get ready to attend the 200-301 Study Guideexam. In every area, timing counts importantly.
At present, Cisco Cisco 200-301 Study Guide exam is very popular.
With our software version of our 200-301 Study Guide guide braindumps, you can practice and test yourself just like you are in a real exam for our 200-301 Study Guide study materials have the advandage of simulating the real exam. The results of your 200-301 Study Guide exam will be analyzed and a statistics will be presented to you. So you can see how you have done and know which kinds of questions of the 200-301 Study Guide exam are to be learned more.
As long as you master these questions and answers, you will sail through the exam you want to attend. Whatever exam you choose to take, Goldmile-Infobiz training dumps will be very helpful to you.
200-301 PDF DEMO:
QUESTION NO: 1
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 2
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Which network allows devices to communicate without the need to access the Internet?
A. 209.165.201.0/24
B. 192.0.0.0/8
C. 172.28.0.0/16
D. 1729.0.0/16
Answer: C
Explanation:
This question asks about the private ranges of IPv4 addresses. The private ranges of each class of IPv4 are listed below:
Class A private IP address ranges from 10.0.0.0 to 10.255.255.255 Class B private IP address ranges from 172.16.0.0 to 172.31.255.255 Class C private IP address ranges from 192.168.0.0 to
192.168.255.255 Only the network 172.28.0.0/16 belongs to the private IP address (of class B).
QUESTION NO: 5
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
Before the clients buy our Microsoft AZ-900-KR guide prep they can have a free download and tryout. SAP C-S4CPR-2508 - As IT staff, how to cultivate your strength? It is a good choice to take IT certification test which can not only help you master more skills, also can get the certificate to prove your ability. We are glad to meet your all demands and answer your all question about our PMI CAPM training materials. Fortinet NSE7_OTS-7.2 - Goldmile-Infobiz pdf real questions and answers can prevent you from wasting lots of time and efforts on preparing for the exam and can help you sail through you exam with ease and high efficiency. There is no exaggeration that you can be confident about your coming exam just after studying with our CISI IFC preparation materials for 20 to 30 hours.
Updated: May 28, 2022