If you really have a problem, please contact us in time and our staff will troubleshoot the issue for you. 200-301 Study Guide exam practice’s smooth operating system has improved the reputation of our products. We also received a lot of praise in the international community. Many clients worry that after they bought our 200-301 Study Guide exam simulation they might find the exam questions are outdated and waste their time, money and energy. There are no needs to worry about that situation because our 200-301 Study Guide study materials boost high-quality and it is proved by the high passing rate and hit rate. Under the tremendous stress of fast pace in modern life, this version of our 200-301 Study Guide test prep suits office workers perfectly.
Our 200-301 Study Guide practice quiz is unique in the market.
Our reliable 200-301 - Cisco Certified Network Associate Exam Study Guide question dumps are developed by our experts who have rich experience in the fields. All intricate points of our New 200-301 Test Dumps study guide will not be challenging anymore. They are harbingers of successful outcomes.
Secondly, our 200-301 Study Guide exam questions will spare no effort to perfect after-sales services. Thirdly countless demonstration and customer feedback suggest that our Cisco Certified Network Associate Exam study question can help them get the certification as soon as possible, thus becoming the elite, getting a promotion and a raise and so forth. We will provide high quality assurance of 200-301 Study Guide exam questions for our customers with dedication to ensure that we can develop a friendly and sustainable relationship.
Cisco 200-301 Study Guide - We are 7*24*365 online service.
With our 200-301 Study Guide learning questions, you can enjoy a lot of advantages over the other exam providers’. The most attraction aspect is that our high pass rate as 98% to 100%. I believe every candidate wants to buy 200-301 Study Guide exam materials that with a high pass rate, because the data show at least two parts of the 200-301 Study Guide exam guide, the quality and the validity. Only with high quality and valid information, our candidates can successfully pass their 200-301 Study Guide exams.
You can choose the device you feel convenient at any time. Our 200-301 Study Guide learning guide allows you to study anytime, anywhere.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
The advantages of our Microsoft AB-731 cram guide is plenty and the price is absolutely reasonable. Huawei H25-621_V1.0 - You can get the information you want to know through the trial version. Cisco 350-901 - The clients only need to choose the version of the product, fill in the correct mails and pay for our Cisco Certified Network Associate Exam guide dump. If you also want to get this certificate to increase your job opportunities, please take a few minutes to see our Fortinet NSE5_FSW_AD-7.6 training materials. It will be your great loss to miss our PECB ISO-9001-Lead-Auditor practice engine.
Updated: May 28, 2022