The system is highly flexible, which has short reaction time. So you will quickly get a feedback about your exercises of the 200-301 Study Notes preparation questions. For example, it will note that how much time you have used to finish the 200-301 Study Notes study guide, and how much marks you got for your practice as well as what kind of the questions and answers you are wrong with. The world is rapidly moving forward due to the prosperous development of information. Our company is also making progress in every side. Now we would like to share the advantages of our 200-301 Study Notes study dump to you, we hope you can spend several minutes on reading our introduction; you will benefit a lot from it.
CCNA 200-301 In every area, timing counts importantly.
To get the Cisco 200-301 - Cisco Certified Network Associate Exam Study Notes exam certification is the goal of many IT people & Network professionals. People who can contact with your name, e-mail, telephone number are all members of the internal corporate. The privacy information provided by you only can be used in online support services and providing professional staff remote assistance.
At present, Cisco 200-301 Study Notes exam is very popular. Do you want to get Cisco 200-301 Study Notes certificate? If it is ok, don't hesitate to sign up for the exam. And don't worry about how to pass the test, Goldmile-Infobiz certification training will be with you.
Cisco 200-301 Study Notes - Mostly choice is greater than effort.
Generally speaking, you can achieve your basic goal within a week with our 200-301 Study Notes study guide. Besides, for new updates happened in this line, our experts continuously bring out new ideas in this 200-301 Study Notes exam for you. The new supplemental updates will be sent to your mailbox if there is and be free. Because we promise to give free update of our 200-301 Study Notes learning materials for one year to all our customers.
Then you can pass the actual test quickly and get certification easily. The 200-301 Study Notes real questions are written and approved by our It experts, and tested by our senior professionals with many years' experience.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 3
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 4
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 5
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
On the pages of our EMC D-PSC-DS-01 exam torrent you can see the version of the product, the updated time, the quantity of the questions and answers, the characteristics and merits of the product, the price of the product and the discounts. What’s more, you can receive Huawei H25-611_V1.0 updated study material within one year after purchase. On the one hand, the software version of ISACA CRISC test questions can simulate the real examination for all users. If you are not satisfied with the function of PDF version which just only provide you the questions and answers, the APP version of APMG-International AgilePM-Foundation exam cram materials can offer you more. But it is not an easy thing for many candidates to pass the ISACA CRISC exam.
Updated: May 28, 2022