Are you trying to pass the 200-301 Study Notes exam to get the longing 200-301 Study Notes certification? As we know, there are a lot of the advantages of the certification, such as higher salaries, better job positions and so on. Perhaps at this moment, you need the help of our 200-301 Study Notes study materials. As our company's flagship product, it has successfully helped countless candidates around the world to obtain the coveted 200-301 Study Notes certification. You can never fail 200-301 Study Notes exam if you use our products. We guarantee your success in 200-301 Study Notes exam or get a full refund. But if it is too complex, not only can’t we get good results, but also the burden of students' learning process will increase largely.
CCNA 200-301 We have 24/7 Service Online Support services.
CCNA 200-301 Study Notes - Cisco Certified Network Associate Exam The product of Goldmile-Infobiz is a very reliable training tool for you. Whenever you have questions about our 200-301 Latest Exam Preparation learning quiz, you are welcome to contact us via E-mail. We sincerely offer you 24/7 online service.
Goldmile-Infobiz is a website which help you successfully pass Cisco 200-301 Study Notes. I believe that people want to have good prospects of career whatever industry they work in. Of course, there is no exception in the competitive IT industry.
Cisco 200-301 Study Notes - Goldmile-Infobiz is a professional website.
According to the statistics shown in the feedback chart, the general pass rate for latest 200-301 Study Notes test prep is 98%, which is far beyond that of others in this field. In recent years, our 200-301 Study Notes exam guide has been well received and have reached 99% pass rate with all our dedication. As one of the most authoritative question bank in the world, our study materials make assurance for your passing the 200-301 Study Notes exam.
If you have any questions about the exam, Goldmile-Infobiz the Cisco 200-301 Study Notes will help you to solve them. Within a year, we provide free updates.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 3
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 4
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 5
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
Microsoft SC-900 - When you start learning, you will find a lot of small buttons, which are designed carefully. Salesforce MC-101 - They used their knowledge and experience as well as the ever-changing IT industry to produce the material. You will our Microsoft PL-300-KR exam dumps are the best! Fortinet NSE4_FGT_AD-7.6 - This training matrial is not only have reasonable price, and will save you a lot of time. You can also know how to contact us and what other client’s evaluations about our CompTIA PK0-005 test braindumps.
Updated: May 28, 2022