Now we would like to introduce the 200-301 Sure Pass certification guide from our company to you. We sincerely hope that our study materials will help you through problems in a short time. As the talent competition increases in the labor market, it has become an accepted fact that the 200-301 Sure Pass certification has become an essential part for a lot of people, especial these people who are looking for a good job, because the certification can help more and more people receive the renewed attention from the leader of many big companies. You can get what you want! You must believe that no matter what you do, as long as you work hard, there is no unsuccessful. We believe that the suitable version will help you improve your learning efficiency.
CCNA 200-301 Goldmile-Infobiz have a huge senior IT expert team.
The industrious Goldmile-Infobiz's IT experts through their own expertise and experience continuously produce the latest Cisco 200-301 - Cisco Certified Network Associate Exam Sure Pass training materials to facilitate IT professionals to pass the Cisco certification 200-301 - Cisco Certified Network Associate Exam Sure Pass exam. Please select Goldmile-Infobiz, it will be the best guarantee for you to pass 200-301 Accurate Test certification exam. Now please add Goldmile-Infobiz to your shopping cart.
If you Goldmile-Infobiz, Goldmile-Infobiz can ensure you 100% pass Cisco certification 200-301 Sure Pass exam. If you fail to pass the exam, Goldmile-Infobiz will full refund to you.
Cisco 200-301 Sure Pass - A bad situation can show special integrity.
Different person has different goals, but our Goldmile-Infobiz aims to help you successfully pass 200-301 Sure Pass exam. Maybe to pass 200-301 Sure Pass exam is the first step for you to have a better career in IT industry, but for our Goldmile-Infobiz, it is the entire meaning for us to develop 200-301 Sure Pass exam software. So we try our best to extend our dumps, and our Goldmile-Infobiz elite comprehensively analyze the dumps so that you are easy to use it. Besides, we provide one-year free update service to guarantee that the 200-301 Sure Pass exam materials you are using are the latest.
Goldmile-Infobiz Cisco 200-301 Sure Pass exam training materials is the best choice to help you pass the exam. The training materials of Goldmile-Infobiz website have a unique good quality on the internet.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
Workday Workday-Pro-HCM-Core - We can be along with you in the development of IT industry. ACAMS CAMS-CN - In order to successfully pass the exam, hurry up to visit Goldmile-Infobiz to know more details. IBM C1000-189 - Sometimes choice is greater than important. BCS PC-BA-FBA-20 - In addition, if you first take the exam, you can use software version dumps. The contents of Salesforce Analytics-Admn-201 free download pdf will cover the 99% important points in your actual test.
Updated: May 28, 2022