In traditional views, 200-301 Test Guide practice materials need you to spare a large amount of time on them to accumulate the useful knowledge may appearing in the real exam. However, our 200-301 Test Guide learning questions are not doing that way. According to data from former exam candidates, the passing rate has up to 98 to 100 percent. Combined with your specific situation and the characteristics of our 200-301 Test Guide exam questions, our professional services will recommend the most suitable version of 200-301 Test Guide study materials for you. We introduce a free trial version of the 200-301 Test Guide learning guide because we want users to see our sincerity. And we have become a famous brand for we have engaged in this career.
CCNA 200-301 So our system is great.
You can feel assertive about your exam with our 100 guaranteed professional 200-301 - Cisco Certified Network Associate Exam Test Guide practice engine for you can see the comments on the websites, our high-quality of our 200-301 - Cisco Certified Network Associate Exam Test Guide learning materials are proved to be the most effective exam tool among the candidates. You will have the right to start to try to simulate the real examination. We believe that the New 200-301 Test Cram Sheet File study materials from our company will not let you down.
And our 200-301 Test Guide test guide benefit exam candidates by improving their ability of coping the exam in two ways, first one is their basic knowledge of it. Our 200-301 Test Guide exam questions generally raised the standard of practice materials in the market with the spreading of higher standard of knowledge in this area. So your personal effort is brilliant but insufficient to pass the Cisco Certified Network Associate Exam exam and our 200-301 Test Guide test guide can facilitate the process smoothly & successfully.
Cisco 200-301 Test Guide - You must have no idea to choose which one.
We are amenable to offer help by introducing our 200-301 Test Guide real exam materials and they can help you pass the Cisco Certified Network Associate Exam practice exam efficiently. All knowledge is based on the real exam by the help of experts. By compiling the most important points of questions into our 200-301 Test Guide guide prep our experts also amplify some difficult and important points. There is no doubt they are clear-cut and easy to understand to fulfill your any confusion about the exam. Our Cisco Certified Network Associate Exam exam question is applicable to all kinds of exam candidates who eager to pass the exam. Last but not the least, they help our company develop brand image as well as help a great deal of exam candidates pass the exam with passing rate over 98 percent of our 200-301 Test Guide real exam materials.
We believe that you must have paid more attention to the pass rate of the Cisco Certified Network Associate Exam exam questions. If you focus on the study materials from our company, you will find that the pass rate of our products is higher than other study materials in the market, yes, we have a 99% pass rate, which means if you take our the 200-301 Test Guide study dump into consideration, it is very possible for you to pass your exam and get the related certification.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
Microsoft MS-102-KR - Of course, if you fail to pass the exam, we will give you a 100% full refund. Adobe AD0-E608-KR - It is not hard to find that there are many different kinds of products in the education market now. SAP C_S4CPB_2508 - Our experts have many years’ experience in this particular line of business, together with meticulous and professional attitude towards jobs. To give the customer the best service, all of our HP HPE3-CL01 exam dump is designed by experienced experts from various field, so our HP HPE3-CL01 Learning materials will help to better absorb the test sites. They are time-tested Fortinet FCSS_EFW_AD-7.6 learning materials, so they are classic.
Updated: May 28, 2022