Are you struggling to prepare Cisco certification 200-301 Test Labs exam? Do you want to achieve the goal of passing Cisco certification 200-301 Test Labs exam as soon as possible? You can choose the training materials provided by Goldmile-Infobiz. If you choose Goldmile-Infobiz, passing Cisco certification 200-301 Test Labs exam is no longer a dream. You are bound to pass the exam if you buy our 200-301 Test Labs learning guide. Instant answer feedback allows you to identify your vulnerabilities in a timely manner, so as to make up for your weaknesses. A lot of my friends from IT industry in order to pass Cisco certification 200-301 Test Labs exam have spend a lot of time and effort, but they did not choose training courses or online training, so passing the exam is so difficult for them and generally, the disposable passing rate is very low.
CCNA 200-301 It can maximize the efficiency of your work.
Our company has employed a lot of excellent experts and professors in the field in the past years, in order to design the best and most suitable 200-301 - Cisco Certified Network Associate Exam Test Labs study materials for all customers. Goldmile-Infobiz guarantee that you will be able to pass the exam. If you are still hesitant, download our sample of material, then you can know the effect.
Once our system receives your application, it will soon send you what you need. Please ensure you have submitted the right email address. And you will have the demos to check them out.
Cisco 200-301 Test Labs - It can help you to pass the exam successfully.
Do you have tried the 200-301 Test Labs online test engine? Here we will recommend the 200-301 Test Labs online test engine offered by Goldmile-Infobiz for all of you. Firstly, 200-301 Test Labs online training can simulate the actual test environment and bring you to the mirror scene, which let you have a good knowledge of the actual test situation. Secondly, the 200-301 Test Labs online practice allows self-assessment, which can bring you some different experience during the preparation. You can adjust your 200-301 Test Labs study plan according to the test result after each practice test.
You have seen Goldmile-Infobiz's Cisco 200-301 Test Labs exam training materials, it is time to make a choice. You can choose other products, but you have to know that Goldmile-Infobiz can bring you infinite interests.
200-301 PDF DEMO:
QUESTION NO: 1
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 4
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
Goldmile-Infobiz release high passing-rate Microsoft AZ-700-KR exam simulations to help you obtain certification in a short time. Fortinet NSE6_SDW_AD-7.6 - Goldmile-Infobiz is a professional website that providing IT certification training materials. Microsoft AI-900-KR - We have statistics to tell you the truth. ACFE CFE-Financial-Transactions-and-Fraud-Schemes - Because it will make you pass the exam easily, since then rise higher and higher on your career path. Beyond knowing the answer, and actually understanding the Google Generative-AI-Leader test questions puts you one step ahead of the test.
Updated: May 28, 2022