You can see that so many people are already ahead of you! You really don't have time to hesitate. If you really want to improve your ability, you should quickly purchase our 200-301 Test Simulator study braindumps! Cisco Certified Network Associate Exam exam tests allow you to get rid of the troubles of reading textbooks in a rigid way, and help you to memorize important knowledge points as you practice. Industry experts hired by 200-301 Test Simulator exam question explain the hard-to-understand terms through examples, forms, etc. We also received a lot of praise in the international community.
CCNA 200-301 And you can choose the favorite one.
You only need to spend 20 to 30 hours on practicing and consolidating of our 200-301 - Cisco Certified Network Associate Exam Test Simulator learning material, you will have a good result. Many exam candidates are uninformed about the fact that our 200-301 Valid Exam Labs preparation materials can help them with higher chance of getting success than others. It is all about efficiency and accuracy.
During the exam, you would be familiar with the questions, which you have practiced in our 200-301 Test Simulator question dumps. That’s the reason why most of our customers always pass exam easily. Our reliable 200-301 Test Simulator question dumps are developed by our experts who have rich experience in the fields.
Cisco 200-301 Test Simulator - The free demo has three versions.
The high quality and high efficiency of 200-301 Test Simulator study guide make it stand out in the products of the same industry. Our 200-301 Test Simulator exam materials have always been considered for the users. If you choose our products, you will become a better self. 200-301 Test Simulator actual exam want to contribute to your brilliant future. With our 200-301 Test Simulator learning braindumps, you can not only get the certification but also learn a lot of the professional knowledge.
Where is a will, there is a way. And our 200-301 Test Simulator exam questions are the exact way which can help you pass the exam and get the certification with ease.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 5
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
We hope that the PMI PMP-CN learning braindumps you purchased are the best for you. It has been widely recognized that the ACAMS CAMS-CN exam can better equip us with a newly gained personal skill, which is crucial to individual self-improvement in today’s computer era. SAP C_ARSUM_2508 - I know you must want to get a higher salary, but your strength must match your ambition! Microsoft AZ-400-KR - Besides, we will provide you a free one-year update service. Generally speaking, Cyber AB CMMC-CCP certification has become one of the most authoritative voices speaking to us today.
Updated: May 28, 2022