App online version of 200-301 Test Voucher learning engine is suitable to all kinds of digital devices and offline exercise. You will find your favorite one if you have a try! Our three kinds of 200-301 Test Voucher real exam includes the new information that you need to know to pass the test. In addition, it is very easy and convenient to make notes during the study for 200-301 Test Voucher real test, which can facilitate your reviewing. When you choose Goldmile-Infobiz practice test engine, you will be surprised by its interactive and intelligence features. With professional experts and brilliant teamwork, our 200-301 Test Voucher exam dumps have helped exam candidates succeed since the beginning.
CCNA 200-301 Time is nothing; timing is everything.
You may urgently need to attend 200-301 - Cisco Certified Network Associate Exam Test Voucher certificate exam and get the certificate to prove you are qualified for the job in some area. It will help you to accelerate your knowledge and improve your professional ability by using our Test 200-301 Cost vce dumps. We are so proud of helping our candidates go through Test 200-301 Cost real exam in their first attempt quickly.
We provide the 200-301 Test Voucher study materials which are easy to be mastered, professional expert team and first-rate service to make you get an easy and efficient learning and preparation for the 200-301 Test Voucher test. Our product’s price is affordable and we provide the wonderful service before and after the sale to let you have a good understanding of our 200-301 Test Voucher study materials before your purchase, you had better to have a try on our free demos.
Cisco 200-301 Test Voucher - Trust us and give yourself a chance to success!
We put ourselves in your shoes and look at things from your point of view. About your problems with our 200-301 Test Voucher exam simulation, our considerate staff usually make prompt reply to your mails especially for those who dislike waiting for days. The sooner we can reply, the better for you to solve your doubts about 200-301 Test Voucher training materials. And we will give you the most professional suggestions on the 200-301 Test Voucher study guide.
This is built on our in-depth knowledge of our customers, what they want and what they need. It is based on our brand, if you read the website carefully, you will get a strong impression of our brand and what we stand for.
200-301 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 2
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 3
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 4
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 5
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
IAPP CIPP-E - This will be helpful for you to review the content of the materials. NCARB Project-Management - We also provide every candidate who wants to get certification with free Demo to check our materials. The Fortinet NSE7_CDS_AR-7.6 prep guide provides user with not only a learning environment, but also create a learning atmosphere like home. Our experts have great familiarity with Microsoft SC-401 real exam in this area. SAP C_BCBTM_2509 - In a word, anytime if you need help, we will be your side to give a hand.
Updated: May 28, 2022