Beyond knowing the answer, and actually understanding the 200-301 Vce File test questions puts you one step ahead of the test. Completely understanding a concept and reasoning behind how something works, makes your task second nature. Your 200-301 Vce File test questions will melt in your hands if you know the logic behind the concepts. So you can personally check the quality of the Goldmile-Infobiz Cisco 200-301 Vce File exam training materials, and then decide to buy it. If you did not pass the exam unfortunately, we will refund the full cost of your purchase. On the one hand, by the free trial services you can get close contact with our products, learn about our 200-301 Vce File study guide, and know how to choose the most suitable version.
CCNA 200-301 Time is nothing; timing is everything.
You may urgently need to attend 200-301 - Cisco Certified Network Associate Exam Vce File certificate exam and get the certificate to prove you are qualified for the job in some area. It will help you to accelerate your knowledge and improve your professional ability by using our Valid 200-301 Test Papers vce dumps. We are so proud of helping our candidates go through Valid 200-301 Test Papers real exam in their first attempt quickly.
We provide the 200-301 Vce File study materials which are easy to be mastered, professional expert team and first-rate service to make you get an easy and efficient learning and preparation for the 200-301 Vce File test. Our product’s price is affordable and we provide the wonderful service before and after the sale to let you have a good understanding of our 200-301 Vce File study materials before your purchase, you had better to have a try on our free demos.
So are our Cisco 200-301 Vce File exam braindumps!
We put ourselves in your shoes and look at things from your point of view. About your problems with our 200-301 Vce File exam simulation, our considerate staff usually make prompt reply to your mails especially for those who dislike waiting for days. The sooner we can reply, the better for you to solve your doubts about 200-301 Vce File training materials. And we will give you the most professional suggestions on the 200-301 Vce File study guide.
This is built on our in-depth knowledge of our customers, what they want and what they need. It is based on our brand, if you read the website carefully, you will get a strong impression of our brand and what we stand for.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 5
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
ACAMS CAMS-CN - This will be helpful for you to review the content of the materials. Cisco 200-201 - We also provide every candidate who wants to get certification with free Demo to check our materials. The Microsoft MS-700-KR prep guide provides user with not only a learning environment, but also create a learning atmosphere like home. Amazon CLF-C02 - So you won’t be pestered with the difficulties of the exam any more. Linux Foundation CKS - In a word, anytime if you need help, we will be your side to give a hand.
Updated: May 28, 2022