Firstly, all knowledge of the 350-401 Bootcamp Materials exam materials have been simplified a lot. Also, we have tested many volunteers who are common people. The results show that our 350-401 Bootcamp Materials study braindumps are easy for them to understand. Each format has distinct strength and shortcomings. We have printable PDF format that you can study our 350-401 Bootcamp Materials training engine anywhere and anytime since it is printable. We can promise that the 350-401 Bootcamp Materials certification braindumps of our company have the absolute authority in the study materials market.
CCNP Enterprise 350-401 You can browser our official websites.
Our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Bootcamp Materials study materials are not only as reasonable priced as other makers, but also they are distinctly superior in the many respects. The content of our Valid Test 350-401 Dumps.Zip learning guide is definitely the most abundant. Before you go to the exam, our Valid Test 350-401 Dumps.Zip exam questions can provide you with the simulating exam environment.
The last but not least we have professional groups providing guidance in terms of download and installment remotely. When you decide to pass the 350-401 Bootcamp Materials exam and get relate certification, you must want to find a reliable exam tool to prepare for exam. That is the reason why I want to recommend our 350-401 Bootcamp Materials prep guide to you, because we believe this is what you have been looking for.
Cisco 350-401 Bootcamp Materials - Our team has the most up-to-date information.
350-401 Bootcamp Materials practice materials are highly popular in the market compared with other materials from competitors whether on the volume of sales or content as well. All precise information on the 350-401 Bootcamp Materials exam questions and high accurate questions are helpful. To help you have a thorough understanding of our 350-401 Bootcamp Materials training prep, free demos are provided for your reference. So sales and customer satisfaction improved dramatically. So we make great contribution both to line and customers greatly.
Whether or not you believe it, there have been a lot of people who have obtained internationally certified certificates through 350-401 Bootcamp Materials exam simulation. And with the certification, they all live a better life now.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Microsoft MS-900 - You only need several hours to learn and prepare for the exam every day. CIPS L4M4 - Our customer service staff, who are willing to be your little helper and answer your any questions about our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) qualification test, fully implement the service principle of customer-oriented service activities, aiming at comprehensive, coordinated and sustainable cooperation relationship with every users. All types of our Microsoft GH-300 exam questions are priced favorably on your wishes. With infallible content for your reference, our VMware 250-612 study guide contains the newest and the most important exam questions to practice. If you have the IBM C1000-182 certification, it will be easier for you to get respect and power.
Updated: May 28, 2022