Before you choose our 350-401 Cert Exam study material, you can try our 350-401 Cert Exam free demo for assessment. For a better idea you can also read 350-401 Cert Exam testimonials from our previous customers at the bottom of our product page to judge the validity. Our updated and useful 350-401 Cert Exam will be the best tool for your success. It means that it can support offline practicing. And our 350-401 Cert Exam learning braindumps are easy to understand for the questions and answers are carefully compiled by the professionals. If you get a certification with our 350-401 Cert Exam latest study guide, maybe your career will change.
We have the complete list of popular 350-401 Cert Exam exams.
We are proud that we have engaged in this career for over ten yeas and helped tens of thousands of the candidates achieve their 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Cert Exam certifications, and our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Cert Exam exam questions are becoming increasingly obvious degree of helping the exam candidates with passing rate up to 98 to 100 percent. Our professional experts not only have simplified the content and grasp the key points for our customers, but also recompiled the Latest 350-401 Exam Simulator Fee preparation materials into simple language so that all of our customers can understand easily no matter which countries they are from. In such a way, you will get a leisure study experience as well as a doomed success on your coming Latest 350-401 Exam Simulator Fee exam.
You don't have to worry about our learning from 350-401 Cert Exam exam question. We assure you that our 350-401 Cert Exam learning materials are easy to understand and use the fewest questions to convey the most important information. As long as you follow the steps of our 350-401 Cert Exam quiz torrent, your mastery of knowledge will be very comprehensive and you will be very familiar with the knowledge points.
Cisco 350-401 Cert Exam - There is no doubt that you can get a great grade.
It is undeniable that a secure investment can bring many benefits to candidates who want to pass the 350-401 Cert Exam exam, without worrying that their money is wasted on useless exam materials, and the most important thing is to pass 350-401 Cert Exam exams. In addition, after the purchase, the candidate will be entitled to a one-year free update, which will help the candidate keep the latest news feeds, and will not leave any opportunity that may lead them to fail the 350-401 Cert Exam exam. We also provide a 100% refund policy for all users who purchase our questions. If for any reason, any candidates fail in the Cisco 350-401 Cert Exam certification exam, we can help you to refund your money and ensure your investment is absolutely safe.
So we have adamant attitude to offer help rather than perfunctory attitude. All 350-401 Cert Exam test prep is made without levity and the passing rate has up to 98 to 100 percent now.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
ACAMS CKYCA - That is to say, almost all the students who choose our products can finally pass the exam. If you do not have extraordinary wisdom, do not want to spend too much time on learning, but want to reach the pinnacle of life through Microsoft MS-700-KR exam, then you must have Microsoft MS-700-KR question torrent. Fortinet FCSS_ADA_AR-6.7 - Sometimes, their useful suggestions will also be adopted. Our VMware 2V0-17.25 study materials are easy to be mastered and boost varied functions. VMware 2V0-17.25 - You need to have a brave attempt.
Updated: May 28, 2022