We have hired professional staff to maintain 350-401 Cert Guide practice engine and our team of experts also constantly updates and renew the question bank according to changes in the syllabus. With 350-401 Cert Guide learning materials, you can study at ease, and we will help you solve all the problems that you may encounter in the learning process. If you have any confusion about our 350-401 Cert Guide exam questions, just contact us and we will help you out. In an increasingly competitive social life, we should keep up with the unpredictable world, regain our knowledge, and pursue decent work and a higher standard of living. If you have a 350-401 Cert Guide certificate, you will gain more competitive advantage and differentiate yourself from other job seekers. As a member of the group who are about to take the 350-401 Cert Guide exam, are you worried about the difficulties in preparing for the exam? Maybe this problem can be solved today, if you are willing to spend a few minutes to try our 350-401 Cert Guide actual exam.
CCNP Enterprise 350-401 How to get to heaven? Shortcart is only one.
CCNP Enterprise 350-401 Cert Guide - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) This is unprecedented true and accurate test materials. Goldmile-Infobiz dumps can absolutely let you get an unexpected effect. Have you thought of how to easily pass Cisco Reliable 350-401 Exam Cram Sheet File test? Have you found the trick? If you don't know what to do, I'll help you.
This is turn out that select Goldmile-Infobiz's Cisco 350-401 Cert Guide exam training materials is to choose success. Someone asked, where is success? Then I tell you, success is in Goldmile-Infobiz. Select Goldmile-Infobiz is to choose success.
Cisco 350-401 Cert Guide - Sometimes choice is greater than important.
Goldmile-Infobiz Cisco 350-401 Cert Guide practice test dumps can help you pass IT certification exam in a relaxed manner. In addition, if you first take the exam, you can use software version dumps. Because the SOFT version questions and answers completely simulate the actual exam. You can experience the feeling in the actual test in advance so that you will not feel anxious in the real exam. After you use the SOFT version, you can take your exam in a relaxed attitude which is beneficial to play your normal level.
The 350-401 Cert Guide study guide provided by the Goldmile-Infobiz is available, affordable, updated and of best quality to help you overcome difficulties in the actual test. We continue to update our dumps in accord with 350-401 Cert Guide real exam by checking the updated information every day.
350-401 PDF DEMO:
QUESTION NO: 1
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 2
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
ASIS PSP - With Goldmile-Infobiz real questions and answers, when you take the exam, you can handle it with ease and get high marks. The content of our SAP C-OCM-2503 dumps torrent covers the key points of exam, which will improve your ability to solve the difficulties of SAP C-OCM-2503 real questions. Our Linux Foundation CNPA exam software offers comprehensive and diverse questions, professional answer analysis and one-year free update service after successful payment; with the help of our Linux Foundation CNPA exam software, you can improve your study ability to obtain Linux Foundation CNPA exam certification. There are Amazon CLF-C02-KR free demo in our exam page for your reference and one-year free update are waiting for you. After confirmation, we will immediately refund all the money that you purchased the Microsoft SC-100 exam materials.
Updated: May 28, 2022