Later, if there is an update, our system will automatically send you the latest Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) version. At the same time, choose the appropriate payment method, such as SWREG, DHpay, etc. Next, enter the payment page, it is noteworthy that we only support credit card payment, do not support debit card. As you can see, our products are very popular in the market. Time and tides wait for no people. If you really want to get the certificate successfully, only 350-401 Certification Cost guide materials with intrinsic contents can offer help they are preeminent materials can satisfy your both needs of studying or passing with efficiency.
CCNP Enterprise 350-401 Then join our preparation kit.
CCNP Enterprise 350-401 Certification Cost - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) We can send you a link within 5 to 10 minutes after your payment. What most useful is that PDF format of our 350-401 Latest Test Dumps Sheet exam materials can be printed easily, you can learn it everywhere and every time you like. It is really convenient for candidates who are busy to prepare the exam.
Among the three versions, the PDF version of 350-401 Certification Cost training guide is specially provided for these candidates, because it supports download and printing.For those who are willing to learn on the phone, as long as you have a browser installed on your phone, you can use the App version of our 350-401 Certification Cost exam questions. The PC version is ideal for computers with windows systems, which can simulate a real test environment. There are also the Value pack of our 350-401 Certification Cost study materials for you to purchase.
Cisco 350-401 Certification Cost - Quickly, the scores will display on the screen.
Good opportunities are always for those who prepare themselves well. You should update yourself when you are still young. Our 350-401 Certification Cost study materials might be a good choice for you. The contents of our study materials are the most suitable for busy people. You can have a quick revision of the 350-401 Certification Cost study materials in your spare time. Also, you can memorize the knowledge quickly. There almost have no troubles to your normal life. You can make use of your spare moment to study our 350-401 Certification Cost study materials. The results will become better with your constant exercises. Please have a brave attempt.
For instance, you can begin your practice of the 350-401 Certification Cost study materials when you are waiting for a bus or you are in subway with the PDF version. When you are at home, you can use the windows software and the online test engine of the 350-401 Certification Cost study materials.
350-401 PDF DEMO:
QUESTION NO: 1
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 2
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
NASM CPT - Goldmile-Infobiz is an excellent IT certification examination information website. However, how to pass Cisco certification ARDMS SPI exam quickly and simply? Our Goldmile-Infobiz can always help you solve this problem quickly. Salesforce B2C-Commerce-Architect - Goldmile-Infobiz's information resources are very wide and also very accurate. Microsoft DP-100 - Through so many feedbacks of these products, our Goldmile-Infobiz products prove to be trusted. Please select Goldmile-Infobiz, it will be the best guarantee for you to pass Peoplecert DevOps-SRE certification exam.
Updated: May 28, 2022