350-401 Collection File & Cisco Latest Implementing Cisco Enterprise Network Core Technologies 350-401 Encor Test Answers - Goldmile-Infobiz

We will inform you that the 350-401 Collection File study materials should be updated and send you the latest version in a year after your payment. We will also provide some discount for your updating after a year if you are satisfied with our 350-401 Collection File exam prepare. The key trait of our product is that we keep pace with the changes of syllabus and the latest circumstance to revise and update our 350-401 Collection File study materials, and we are available for one-year free updating to assure you of the reliability of our service. Our experts are working hard on our 350-401 Collection File exam questions to perfect every detail in our research center. Once they find it possible to optimize the 350-401 Collection File study guide, they will test it for many times to ensure the stability and compatibility. 350-401 Collection File practice quiz provide you with the most realistic test environment, so that you can adapt in advance so that you can easily deal with formal exams.

CCNP Enterprise 350-401 PDF Version is easy to read and print.

CCNP Enterprise 350-401 Collection File - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) You can consult online no matter what problems you encounter. But we guarantee to you if you fail in we will refund you in full immediately and the process is simple. If only you provide us the screenshot or the scanning copy of the 350-401 Exam Introduction failure marks we will refund you immediately.

We need to have more strength to get what we want, and 350-401 Collection File exam dumps may give you these things. After you use our study materials, you can get 350-401 Collection File certification, which will better show your ability, among many competitors, you will be very prominent. Using 350-401 Collection File exam prep is an important step for you to improve your soft power.

Cisco 350-401 Collection File - It is useless if you do not prepare well.

Our company has a professional team of experts to write 350-401 Collection File preparation materials and will constantly update it to ensure that it is synchronized with the exam content. In addition to the high quality, reasonable price and so on, we have many other reasons to make you choose our 350-401 Collection File actual exam. There are three versions of our 350-401 Collection File exam questions: PDF, Software and APP online which can provide you the varied study experiences.

So you must act from now. As we all know, time and tide wait for no man.

350-401 PDF DEMO:

QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.

QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 3
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID

QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

The latest SAP C_ARCON_2508 exam torrent covers all the qualification exam simulation questions in recent years, including the corresponding matching materials at the same time. Now Goldmile-Infobiz provide you a effective method to pass Cisco certification SAP C-S4CPB-2508 exam. Our Amazon SAP-C02-KR test questions are compiled by domestic first-rate experts and senior lecturer and the contents of them contain all the important information about the test and all the possible answers of the questions which maybe appear in the test. Now you can free download part of practice questions and answers of Cisco certification Real Estate Licensing Virginia-Real-Estate-Salesperson exam on Goldmile-Infobiz. Splunk SPLK-5001 - The more efforts you make, the luckier you are.

Updated: May 28, 2022