This is built on our in-depth knowledge of our customers, what they want and what they need. It is based on our brand, if you read the website carefully, you will get a strong impression of our brand and what we stand for. There are so many advantages of our 350-401 Cram Questions actual exam, and you are welcome to have a try! This will be helpful for you to review the content of the materials. If you are busy with work and can't afford a lot of spare time to review, you can choose the other two versions of our 350-401 Cram Questions exam questions: Software and APP online versions. You can learn 350-401 Cram Questions quiz torrent skills and theory at your own pace, and you are not necessary to waste your time on some useless books or materials and you will save more time and energy that you can complete other thing.
CCNP Enterprise 350-401 Try to immerse yourself in new experience.
Our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Cram Questions guide prep is priced reasonably with additional benefits valuable for your reference. After careful preparation, you are bound to pass the 350-401 Valid Exam Collection Free exam. Just remember that all your efforts will finally pay off.
We claim that you can be ready to attend your exam after studying with our 350-401 Cram Questionsstudy guide for 20 to 30 hours because we have been professional on this career for years. We can’t deny that the pursuit of success can encourage us to make greater progress. Just as exactly, to obtain the certification of 350-401 Cram Questions exam braindumps, you will do your best to pass the according exam without giving up.
Cisco 350-401 Cram Questions - We strongly advise you to have a brave attempt.
We has a long history of 10 years in designing the 350-401 Cram Questions exam guide and enjoys a good reputation across the globe. There are so many features to show that our 350-401 Cram Questions study engine surpasses others. We can confirm that the high quality is the guarantee to your success. At the same time, the prices of our 350-401 Cram Questions practice materials are quite reasonable for no matter the staffs or the students to afford. What is more, usually we will give some discounts to our worthy customers.
We have designed a chat window below the web page. Once you want to ask some questions about the 350-401 Cram Questions training engine, you can click the little window.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
ISACA AAISM - And we will let you down. HP HPE0-J68-KR - Using our products, you can get everything you want, including your most important pass rate. To understand our Cisco 350-901 learning questions in detail, just come and try! HashiCorp Terraform-Associate-003 - Perhaps our research data will give you some help. Microsoft DP-900-KR - Many people want to be the competent people which can excel in the job in some area and be skillful in applying the knowledge to the practical working in some industry.
Updated: May 28, 2022