We know that tenet from the bottom of our heart, so all parts of service are made due to your interests. You are entitled to have full money back if you fail the exam even after getting our 350-401 Detailed Answers test prep. Our staff will help you with genial attitude. Almost all candidates know our 350-401 Detailed Answers exam questions as a powerful brand. Once their classmates or colleagues need to prepare an exam, they will soon introduce them to choose our 350-401 Detailed Answers study materials. At the same time, 350-401 Detailed Answers exam torrent will also help you count the type of the wrong question, so that you will be more targeted in the later exercises and help you achieve a real improvement.
CCNP Enterprise 350-401 Also, annual official test is also included.
No matter what kind of learning method you like, you can find the best one for you at 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Detailed Answers exam materials. During the trial process, you can learn about the three modes of Latest Test 350-401 Collection Pdf study quiz and whether the presentation and explanation of the topic in Latest Test 350-401 Collection Pdf preparation questions is consistent with what you want. If you are interested in our products, I believe that after your trial, you will certainly not hesitate to buy it.
If you eventually fail the exam, we will refund the fee by the contract. We are confident that in the future, our 350-401 Detailed Answers study tool will be more attractive and the pass rate will be further enhanced. As the authoritative provider of 350-401 Detailed Answers guide training, we can guarantee a high pass rate compared with peers, which is also proved by practice.
Cisco 350-401 Detailed Answers - All people dream to become social elite.
If you are sure that you want to pass Cisco certification 350-401 Detailed Answers exam, then your selecting to purchase the training materials of Goldmile-Infobiz is very cost-effective. Because this is a small investment in exchange for a great harvest. Using Goldmile-Infobiz's test questions and exercises can ensure you pass Cisco certification 350-401 Detailed Answers exam. Goldmile-Infobiz is a website which have very high reputation and specifically provide simulation questions, practice questions and answers for IT professionals to participate in the Cisco certification 350-401 Detailed Answers exam.
The pass rate is the test of a material. Such a high pass rate is sufficient to prove that 350-401 Detailed Answers guide materials has a high quality.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Python Institute PCAP-31-03 - At last, you will not regret your choice. when you buy our SAP C_S4CS_2508 simulating exam, our website will use professional technology to encrypt the privacy of every user to prevent hackers from stealing. Fortinet FCSS_SDW_AR-7.4 - Through our short-term special training You can quickly grasp IT professional knowledge, and then have a good preparation for your exam. But our Fortinet FCSS_NST_SE-7.4 study materials have the high pass rate as 98% to 100%, so it is guarantee for you to pass. Fortinet NSE5_SSE_AD-7.6 - We will provide one year free update service for those customers who choose Goldmile-Infobiz's products.
Updated: May 28, 2022