350-401 Discount Voucher & Cisco Training 350-401 Pdf - Implementing Cisco Enterprise Network Core Technologies 350-401 Encor - Goldmile-Infobiz

In addition, the 350-401 Discount Voucher exam dumps system from our company can help all customers ward off network intrusion and attacks prevent information leakage, protect user machines network security. If you choose our 350-401 Discount Voucher study questions as your study tool, we can promise that we will try our best to enhance the safety guarantees and keep your information from revealing, and your privacy will be protected well. You can rest assured to buy the 350-401 Discount Voucher exam dumps from our company. Once you purchase our 350-401 Discount Voucher exam material, your time and energy will reach a maximum utilization. Thus at that time, you would not need to afraid of the cruel society and peer pressure with 350-401 Discount Voucher certification. For example, it will note that how much time you have used to finish the 350-401 Discount Voucher study guide, and how much marks you got for your practice as well as what kind of the questions and answers you are wrong with.

CCNP Enterprise 350-401 You will know the effect of this exam materials.

350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Discount Voucher study material is suitable for all people. You know how important this certification to you. Do not worry about that you can't pass the exam, and do not doubt your ability.

So a wise and diligent person should absorb more knowledge when they are still young. At present, our 350-401 Discount Voucher study prep has gained wide popularity among different age groups. Most of them are consistently learning different things.

Cisco 350-401 Discount Voucher - So you can take a best preparation for the exam.

With the help of the 350-401 Discount Voucher practice exam questions and preparation material offered by Goldmile-Infobiz, you can pass any 350-401 Discount Voucher certifications exam in the first attempt. You don’t have to face any trouble, and you can simply choose to do a selective 350-401 Discount Voucher brain dumps to pass the exam. We offer guaranteed success with 350-401 Discount Voucher dumps questions on the first attempt, and you will be able to pass the 350-401 Discount Voucher exam in short time. You can always consult our 350-401 Discount Voucher certified professional support if you are facing any problems.

Goldmile-Infobiz's training tool has strong pertinence, which can help you save a lot of valuable time and energy to pass IT certification exam. Our exercises and answers and are very close true examination questions.

350-401 PDF DEMO:

QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.

QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 4
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID

QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

CompTIA 220-1102 - Want to know what they said about us, visit our testimonial section and read first-hand experiences from verified users. Huawei H25-532_V1.0 - If these training products do not help you pass the exam, we guarantee to refund the full purchase cost. Cisco 200-301 - We take the rights of the consumer into consideration. Huawei H19-410_V1.0 - But they need a lot of time to participate in the certification exam training courses. Huawei H19-492_V1.0 - We can sure that it is very significant for you to be aware of the different text types and how best to approach them by demo.

Updated: May 28, 2022