At the same time, we warmly welcome that you tell us your suggestion about our 350-401 Dumps Guide study torrent, because we believe it will be very useful for us to utilize our 350-401 Dumps Guide test torrent. In order to solve customers’ problem in the shortest time, our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) guide torrent provides the twenty four hours online service for all people. Maybe you have some questions about our 350-401 Dumps Guide test torrent when you use our products; it is your right to ask us in anytime and anywhere. Our 350-401 Dumps Guide training engine is revised by experts and approved by experienced professionals, which simplify complex concepts and add examples, simulations to explain anything that may be difficult to understand. Therefore, using 350-401 Dumps Guide exam prep makes it easier for learners to grasp and simplify the content of important 350-401 Dumps Guide information, no matter novice or experienced, which can help you save a lot of time and energy eventually. It is more and more important for us to keep pace with the changeable world and improve ourselves for the beautiful life.
CCNP Enterprise 350-401 Why not have a try?
In case there are any changes happened to the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Dumps Guide exam, the experts keep close eyes on trends of it and compile new updates constantly. With our New 350-401 Exam Test exam questions, you will easily get the favor of executives and successfully enter the gates of famous companies. You will have higher wages and a better development platform.
If you have problems about our 350-401 Dumps Guide study materials such as installation, operation and so on, we will quickly reply to you after our online workers have received your emails. We are not afraid of troubles. We warmly welcome to your questions and suggestions.
Cisco 350-401 Dumps Guide - In the end, you will become an excellent talent.
Our 350-401 Dumps Guide exam questions are valuable and useful and if you buy our 350-401 Dumps Guide study materials will provide first-rate service to you to make you satisfied. We provide not only the free download and try out of the 350-401 Dumps Guide practice guide but also the immediate download after your purchase successfully. To see whether our 350-401 Dumps Guide training dumps are worthy to buy, you can have a try on our product right now.
On the one hand, you can elevate your working skills after finishing learning our 350-401 Dumps Guide study materials. On the other hand, you will have the chance to pass the exam and obtain the 350-401 Dumps Guidecertificate, which can aid your daily work and get promotion.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
The key strong-point of our SAP C_SIGPM_2403 test guide is that we impart more important knowledge with fewer questions and answers, with those easily understandable SAP C_SIGPM_2403 study braindumps, you will find more interests in them and experience an easy learning process. And you will have a totally different life if you just get the Fortinet NSE6_SDW_AD-7.6 certification. Many people worry about buying electronic products on Internet, like our SAP C-CPE-2409 preparation quiz, we must emphasize that our SAP C-CPE-2409 simulating materials are absolutely safe without viruses, if there is any doubt about this after the pre-sale, we provide remote online guidance installation of our SAP C-CPE-2409 exam practice. CheckPoint 156-215.82 - For it also supports the offline practice. You can learn our Fortinet NSE7_SSE_AD-25 exam torrent in a piecemeal time, and you don't have to worry about the tedious and cumbersome learning content.
Updated: May 28, 2022