Only 20-30 hours on our 350-401 Exam Book learning guide are needed for the client to prepare for the test and it saves our client’s time and energy. Most people may wish to use the shortest time to prepare for the test and then pass the test with our 350-401 Exam Book study materials successfully because they have to spend their most time and energy on their jobs, learning, family lives and other important things. Our 350-401 Exam Book study materials can satisfy their wishes and they only spare little time to prepare for exam. Our goal is ensure you get high passing score in the 350-401 Exam Book practice exam with less effort and less time. The accuracy of our questions and answers will the guarantee of passing actual test. We can make sure that our 350-401 Exam Book study materials have the ability to help you solve your problem, and you will not be troubled by these questions above.
CCNP Enterprise 350-401 And we have become a popular brand in this field.
As a market leader, our company is able to attract quality staffs on our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Book exam materials , it actively seeks out those who are energetic, persistent, and professional to various 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Book certificate and good communicator. For many people, it’s no panic passing the 350-401 Training Solutions exam in a short time. Luckily enough，as a professional company in the field of 350-401 Training Solutions practice questions ,our products will revolutionize the issue.
When you buy things online, you must ensure the security of online purchasing, otherwise your rights will be harmed. Our 350-401 Exam Book study tool purchase channel is safe, we invite experts to design a secure purchasing process for our 350-401 Exam Book qualification test, and the performance of purchasing safety has been certified, so personal information of our clients will be fully protected. All customers can feel comfortable when they choose to buy our 350-401 Exam Book study tool.
Cisco 350-401 Exam Book - So, buy our products immediately!
A lot of things can’t be tried before buying or the product trail will charge a certain fee, but our 350-401 Exam Book exam questions are very different, you can try it free before you buy it. It’s like buying clothes, you only know if it is right for you when you try it on. In the same way, in order to really think about our customers, we offer a free trial version of our 350-401 Exam Book study prep for you, so everyone has the opportunity to experience a free trial version of our 350-401 Exam Book learning materials.
Knowledge of the 350-401 Exam Book real study dumps contains are very comprehensive, not only have the function of online learning, also can help the user to leak fill a vacancy, let those who deal with qualification exam users can easily and efficient use of the 350-401 Exam Book question guide. By visit our website, the user can obtain an experimental demonstration, free after the user experience can choose the most appropriate and most favorite 350-401 Exam Book exam questions download.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
You can use your smart phones, laptops, the tablet computers or other equipment to download and learn our SAP C-THR81-2505 learning dump. Huawei H31-311_V2.5 - What are you waiting for? Just buy our exam braindumps! So they hope that they can be devoting all of their time to preparing for the Amazon SAP-C02-KR exam, but it is very obvious that a lot of people have not enough time to prepare for the important exam. We will solve your problem immediately and let you have Microsoft AZ-700-KR exam questions in the least time for you to study. Amazon AIF-C01 - At the information age, knowledge is wealth as well as productivity.
Updated: May 28, 2022