350-401 Exam Dump - Cisco New Implementing Cisco Enterprise Network Core Technologies 350-401 Encor Test Questions Vce - Goldmile-Infobiz

If you have a similar situation, we suggest you try 350-401 Exam Dump practice materials. 350-401 Exam Dump test guide is compiled by experts of several industries tailored to 350-401 Exam Dump exam to help students improve their learning efficiency and pass the exam in the shortest time. Experts conducted detailed analysis of important test sites according to the examination outline, and made appropriate omissions for unimportant test sites. Are you worried about how to passs the terrible Cisco 350-401 Exam Dump exam? Do not worry, With Goldmile-Infobiz's Cisco 350-401 Exam Dump exam training materials in hand, any IT certification exam will become very easy. Goldmile-Infobiz's Cisco 350-401 Exam Dump exam training materials is a pioneer in the Cisco 350-401 Exam Dump exam certification preparation. Our 350-401 Exam Dump study prep will not disappoint you.

CCNP Enterprise 350-401 Remember, the fate is in your own hands.

Once you have made up your minds to change, come to purchase our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Dump training practice. Cisco 350-401 Valid APP Simulations certification exam is very important for every IT person. With this certification you will not be eliminated, and you will be a raise.

We can't say it’s the best reference, but we're sure it won't disappoint you. This can be borne out by the large number of buyers on our website every day. And our pass rate of our 350-401 Exam Dump exam braindumps is high as 98% to 100%.

Cisco 350-401 Exam Dump - Learning is the best way to make money.

Everyone wants to succeed. As a worker in IT industry, you know how important the 350-401 Exam Dump exam certification is for your career success. There are more and more people to participate in 350-401 Exam Dump certification exam, and how to win in the increasingly competitive situation? To chose the right hand is the key. Our Goldmile-Infobiz team has studies the 350-401 Exam Dump certification exam for years so that we have in-depth knowledge of the test. We believe that you must be succeed in the exam with the help of 350-401 Exam Dump test software provided by our Goldmile-Infobiz.

Such a Goldmile-Infobiz that help you gain such a valuable certificate with less time and less money is very cost-effective for you. Having Cisco certification 350-401 Exam Dump exam certificate is equivalent to your life with a new milestone and the work will be greatly improved.

350-401 PDF DEMO:

QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.

QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

As a prestigious platform offering practice material for all the IT candidates, Goldmile-Infobiz experts try their best to research the best valid and useful Cisco Esri ESDP_2025 exam dumps to ensure you 100% pass. Naturally, Cisco certification AGRC ICCGO exam has become a very popular exam in the IT area. With our Scaled Agile SAFe-Agilist free demo, you can check out the questions quality, validity of our Cisco practice torrent before you choose to buy it. CIPS L4M5 - Goldmile-Infobiz is website that can take you access to the road of success. you can download any time if you are interested in our HP HPE6-A87 dumps torrent.

Updated: May 28, 2022