Because of not having appropriate review methods and review materials, or not grasping the rule of the questions, so many candidates eventually failed to pass the 350-401 Exam Exercise exam even if they have devoted much effort. At this moment, we sincerely recommend our 350-401 Exam Exercise exam materials to you, which will be your best companion on the way to preparing for the exam. And with high pass rate as 98% to 100%, you will be bound to pass the exam as long as you choose our 350-401 Exam Exercise praparation questions. Just add it to your cart. Our website gives detailed guidance to our candidates for the preparations of 350-401 Exam Exercise actual test and lead them toward the direction of success. However, the appearance of our 350-401 Exam Exercise certification materials will solve your question and change your impression of 350-401 Exam Exercise certification exam.
CCNP Enterprise 350-401 People’s tastes also vary a lot.
Our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Exercise study guide is the most reliable and popular exam product in the marcket for we only sell the latest 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Exercise practice engine to our clients and you can have a free trial before your purchase. Professional research data is our online service and it contains simulation training examination and practice questions and answers about Cisco certification Exam 350-401 Vce Format exam. Goldmile-Infobiz's after-sales service is not only to provide the latest exam practice questions and answers and dynamic news about Cisco Exam 350-401 Vce Format certification, but also constantly updated exam practice questions and answers and binding.
Our 350-401 Exam Exercise study guide can release your stress of preparation for the test. Our 350-401 Exam Exercise exam engine is professional, which can help you pass the exam for the first time. If you can’t wait getting the certificate, you are supposed to choose our 350-401 Exam Exercise study guide.
Cisco 350-401 Exam Exercise - I believe that you must think so.
Our 350-401 Exam Exercise exam prep is elaborately compiled and highly efficiently, it will cost you less time and energy, because we shouldn’t waste our money on some unless things. The passing rate and the hit rate are also very high, there are thousands of candidates choose to trust our 350-401 Exam Exercise guide torrent and they have passed the exam. We provide with candidate so many guarantees that they can purchase our study materials no worries. So we hope you can have a good understanding of the 350-401 Exam Exercise exam torrent we provide, then you can pass you exam in your first attempt.
Because this is the exam dumps that can help you pass 350-401 Exam Exercise certification test at the first attempt. High passing rate of Goldmile-Infobiz questions and answers is certified by many more candidates.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
I can guarantee that you will have no regrets about using our HP HPE2-W12 test braindumps When the time for action arrives, stop thinking and go in, try our HP HPE2-W12 exam torrent, you will find our products will be a very good choice for you to pass your exam and get you certificate in a short time. Databricks Associate-Developer-Apache-Spark-3.5 - Come on and visit Goldmile-Infobiz to know more information. You will be feeling be counteracted the effect of tension for our VMware 3V0-21.25 practice dumps can relieve you of the anxious feelings. It is no longer an accident for you to pass Huawei H19-484_V1.0 exam after you have use our Huawei H19-484_V1.0 exam software. But our IBM S2000-025 real exam is high efficient which can pass the IBM S2000-025 exam during a week.
Updated: May 28, 2022