With the simulation test, all of our customers will get accustomed to the 350-401 Exam Guide exam easily, and get rid of bad habits, which may influence your performance in the real 350-401 Exam Guide exam. In addition, the mode of 350-401 Exam Guide learning guide questions and answers is the most effective for you to remember the key points. During your practice process, the 350-401 Exam Guide test questions would be absorbed, which is time-saving and high-efficient. But have you tried it? We often hear this, “Goldmile-Infobiz questions and answers are really good reference materials, thanks to the dumps, I pass my exam successfully.” Goldmile-Infobiz has been favourably commented by the people who used its questions and answers. This is because it can really help students to save a lot of time, and ensure that everyone pass the exam successfully. In this high-speed world, a waste of time is equal to a waste of money.
CCNP Enterprise 350-401 Please follow your heart.
Our test engine is an exam simulation that makes our candidates feel the atmosphere of 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Guide actual test and face the difficulty of certification exam ahead. Your convenience and demands also deserve our deep consideration. At the same time, your property rights never expire once you have paid for money.
When you decide to prepare for the Cisco certification, you must want to pass at first attempt. Now, make a risk-free investment in training and certification with the help of 350-401 Exam Guide practice torrent. Our 350-401 Exam Guide test engine allows you to practice until you think it is ok.
Cisco 350-401 Exam Guide - We sincerely offer you 24/7 online service.
I believe that people want to have good prospects of career whatever industry they work in. Of course, there is no exception in the competitive IT industry. IT Professionals working in the IT area also want to have good opportunities for promotion of job and salary. A lot of IT professional know that Cisco certification 350-401 Exam Guide exam can help you meet these aspirations. Goldmile-Infobiz is a website which help you successfully pass Cisco 350-401 Exam Guide.
If only you open it in the environment with the network for the first time you can use our 350-401 Exam Guide training materials in the off-line condition later. It depends on the client to choose the version they favor to learn our 350-401 Exam Guide study materials.
350-401 PDF DEMO:
QUESTION NO: 1
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 2
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 3
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
A. Type 1 hypervisor enables other operating systems to run on it
B. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS
C. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
D. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques
Answer: B
Explanation:
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server.
Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures.
Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and
Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
In Goldmile-Infobiz's website you can free download study guide, some exercises and answers about Cisco certification Huawei H25-621_1.0 exam as an attempt. If you purchase our SAP C-ARP2P-2508 practice materials, we believe that your life will get better and better. Do you want to pass Cisco certification SAP C_SIGVT_2506 exam easily? Please add Goldmile-Infobiz's Cisco certification SAP C_SIGVT_2506 exam practice questions and answers to your cart now! PECB ISO-9001-Lead-Auditor - You are lucky to click into this link for we are the most popular vendor in the market. It focuses on the most advanced Cisco Amazon CLF-C02 for the majority of candidates.
Updated: May 28, 2022