If you can choose to trust us, I believe you will have a good experience when you use the 350-401 Exam Objectives study guide, and you can pass the exam and get a good grade in the test 350-401 Exam Objectives certification. With the qualification certificate, you are qualified to do this professional job. Therefore, getting the test 350-401 Exam Objectives certification is of vital importance to our future employment. Many customers claimed that our study materials made them at once enlightened after using them for review. If you are still tentative about our 350-401 Exam Objectives exam dumps, and some exam candidate remain ambivalent to the decision of whether to choose our 350-401 Exam Objectives training materials, there are free demos for your reference for we understand your hesitation. If we miss the opportunity, we will accomplish nothing.
CCNP Enterprise 350-401 In the end, you will become an excellent talent.
Our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Objectives exam questions are valuable and useful and if you buy our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Objectives study materials will provide first-rate service to you to make you satisfied. On the one hand, you can elevate your working skills after finishing learning our Valid Dumps 350-401 Ppt study materials. On the other hand, you will have the chance to pass the exam and obtain the Valid Dumps 350-401 Pptcertificate, which can aid your daily work and get promotion.
Our 350-401 Exam Objectives exam guide have also set a series of explanation about the complicated parts certificated by the syllabus and are based on the actual situation to stimulate exam circumstance in order to provide you a high-quality and high-efficiency user experience. In addition, the 350-401 Exam Objectives exam guide function as a time-counter, and you can set fixed time to fulfill your task, so that promote your efficiency in real test. The key strong-point of our 350-401 Exam Objectives test guide is that we impart more important knowledge with fewer questions and answers, with those easily understandable 350-401 Exam Objectives study braindumps, you will find more interests in them and experience an easy learning process.
Cisco 350-401 Exam Objectives - As old saying goes, all roads lead to Rome.
Many people worry about buying electronic products on Internet, like our 350-401 Exam Objectives preparation quiz, we must emphasize that our 350-401 Exam Objectives simulating materials are absolutely safe without viruses, if there is any doubt about this after the pre-sale, we provide remote online guidance installation of our 350-401 Exam Objectives exam practice. It is worth noticing that some people who do not use professional anti-virus software will mistakenly report the virus.
And the best advantage of the software version is that it can simulate the real exam. Once you purchase our windows software of the 350-401 Exam Objectives training engine, you can enjoy unrestricted downloading and installation of our 350-401 Exam Objectives study guide.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 5
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
Amazon AWS-Certified-Developer-Associate - We will simplify the complex concepts by adding diagrams and examples during your study. HP HPE7-A01 - Not only do we offer free demo services before purchase, we also provide three learning modes for users. After you know about our Real Estate Massachusetts-Real-Estate-Salesperson actual questions, you can decide to buy it or not. First of all, we have the best and most first-class operating system, in addition, we also solemnly assure users that users can receive the information from the Oracle 1z0-1046-25 certification guide within 5-10 minutes after their payment. Besides if you have any trouble coping with some technical and operational problems while using our Huawei H19-495_V1.0 exam torrent, please contact us immediately and our 24 hours online services will spare no effort to help you solve the problem in no time.
Updated: May 28, 2022