In cyber age, it’s essential to pass the 350-401 Exam Question exam to prove ability especially for lots of office workers. Our company, with a history of ten years, has been committed to making efforts on developing 350-401 Exam Question exam guides in this field. Since the establishment, we have won wonderful feedback from customers and ceaseless business and continuously worked on developing our 350-401 Exam Question exam prepare to make it more received by the public. And our professional 350-401 Exam Question study materials determine the high pass rate. According to the research statistics, we can confidently tell that 99% candidates after using our products have passed the 350-401 Exam Question exam. With the popularization of wireless network, those who are about to take part in the 350-401 Exam Question exam guide to use APP on the mobile devices as their learning tool, because as long as entering into an online environment, they can instantly open the learning material from their appliances.
There are many advantages of our 350-401 Exam Question study tool.
CCNP Enterprise 350-401 Exam Question - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Experts expressed their meaning with clarity by knowledgeable and understandable words which cannot be misunderstood. Our supporter of 350-401 Reliable Braindumps Sheet study guide has exceeded tens of thousands around the world, which directly reflects the quality of them. Because the exam may put a heavy burden on your shoulder while our 350-401 Reliable Braindumps Sheet practice materials can relieve you of those troubles with time passing by.
Our three versions of 350-401 Exam Question study materials are the PDF, Software and APP online. They have their own advantages differently and their prolific 350-401 Exam Question practice materials can cater for the different needs of our customers, and all these 350-401 Exam Question simulating practice includes the new information that you need to know to pass the test for we always update it in the first time. So you can choose them according to your personal preference.
Cisco 350-401 Exam Question - The rate of return will be very obvious for you.
Through our investigation and analysis of the real problem over the years, our 350-401 Exam Question prepare questions can accurately predict the annual 350-401 Exam Question exams. In the actual exam process, users will encounter almost half of the problem is similar in our products. Even if the syllabus is changing every year, the 350-401 Exam Question quiz guide’s experts still have the ability to master propositional trends. Believe that such a high hit rate can better help users in the review process to build confidence, and finally help users through the qualification examination to obtain a certificate. All in all, we want you to have the courage to challenge yourself, and our 350-401 Exam Question exam prep will do the best for the user's expectations.
Next, through my introduction, I hope you can have a deeper understanding of our 350-401 Exam Question learning quiz. We really hope that our 350-401 Exam Question practice engine will give you some help.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
Although involved three versions of the teaching content is the same, but for all types of users can realize their own needs, whether it is which version of Microsoft PL-200 learning materials, believe that can give the user a better learning experience. Fortinet NSE7_CDS_AR-7.6 - At home, you can use the computer and outside you can also use the phone. SAP C-ARSUM-2508 - In our study, we found that many people have the strongest ability to use knowledge for a period of time at the beginning of their knowledge. IIA IIA-CIA-Part2 - There are no additional ads to disturb the user to use the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) qualification question. Our ServiceNow CIS-HAM learning reference files have a high efficient product maintenance team, a professional staff every day real-time monitoring the use of the user environment and learning platform security, even in the incubation period, we can accurate solution for the user, for the use of the user to create a safer environment.
Updated: May 28, 2022