If you buy the 350-401 Exam Review study materials from our company, you will have the right to enjoy the perfect service. We have employed a lot of online workers to help all customers solve their problem. If you have any questions about the 350-401 Exam Review study materials, do not hesitate and ask us in your anytime, we are glad to answer your questions and help you use our 350-401 Exam Review study materials well. Do you want to pass 350-401 Exam Review practice test in your first attempt with less time? Then you can try our latest training certification exam materials. We not only provide you valid 350-401 Exam Review exam answers for your well preparation, but also bring guaranteed success results to you. What is more, there is no interminable cover charge for our 350-401 Exam Review practice materials priced with reasonable prices for your information.
CCNP Enterprise 350-401 Don't hesitate.
You will be feeling be counteracted the effect of tension for our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Review practice dumps can relieve you of the anxious feelings. It is no longer an accident for you to pass Latest 350-401 Braindumps Sheet exam after you have use our Latest 350-401 Braindumps Sheet exam software. You will have thorough training and exercises from our huge question dumps, and master every question from the detailed answer analysis.
During the prolonged review, many exam candidates feel wondering attention is hard to focus. But our 350-401 Exam Review real exam is high efficient which can pass the 350-401 Exam Review exam during a week. To prevent you from promiscuous state, we arranged our 350-401 Exam Review learning materials with clear parts of knowledge.
Cisco 350-401 Exam Review - In fact here you should have credit card.
Only 20-30 hours on our 350-401 Exam Review learning guide are needed for the client to prepare for the test and it saves our client’s time and energy. Most people may wish to use the shortest time to prepare for the test and then pass the test with our 350-401 Exam Review study materials successfully because they have to spend their most time and energy on their jobs, learning, family lives and other important things. Our 350-401 Exam Review study materials can satisfy their wishes and they only spare little time to prepare for exam.
Our goal is ensure you get high passing score in the 350-401 Exam Review practice exam with less effort and less time. The accuracy of our questions and answers will the guarantee of passing actual test.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 3
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
We can make sure that our ASQ CSSBB study materials have the ability to help you solve your problem, and you will not be troubled by these questions above. It is not easy to get the CIPS L4M2 certification, while certified with which can greatly impact the future of the candidates. RUCKUS RCWA - You must pay more attention to the study materials. CIPS L5M1 - We provide services 24/7 with patient and enthusiastic staff. That helping you pass the BCS TM3 exam successfully has been given priority to our agenda.
Updated: May 28, 2022