If you purchase 350-401 Exam Reviews exam questions and review it as required, you will be bound to successfully pass the exam. And if you still don't believe what we are saying, you can log on our platform right now and get a trial version of 350-401 Exam Reviews study engine for free to experience the magic of it. Of course, if you encounter any problems during free trialing, feel free to contact us and we will help you to solve all problems on the 350-401 Exam Reviews practice engine. 350-401 Exam Reviews soft test simulator is popular by many people since it can be applied in nearly all electronic products. If you download and install on the personal computer first time, and then copy to your USB flash disk. The 350-401 Exam Reviews prep guide adopt diversified such as text, images, graphics memory method, have to distinguish the markup to learn information, through comparing different color font, as well as the entire logical framework architecture, let users on the premise of grasping the overall layout, better clues to the formation of targeted long-term memory, and through the cycle of practice, let the knowledge more deeply printed in my mind.
CCNP Enterprise 350-401 Choosing our products is choosing success.
CCNP Enterprise 350-401 Exam Reviews - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) There is a succession of anecdotes, and there are specialized courses. You can totally trust our Top 350-401 Dumps practice test because all questions are created based on the requirements of the certification center. Latest Top 350-401 Dumps test questions are verified and tested several times by our colleagues to ensure the high pass rate of our Top 350-401 Dumps study guide.
Unlike other 350-401 Exam Reviews study materials, there is only one version and it is not easy to carry. Our 350-401 Exam Reviews exam questions mainly have three versions which are PDF, Software and APP online, and for their different advantafes, you can learn anywhere at any time. And the prices of our 350-401 Exam Reviews training engine are reasonable for even students to afford and according to the version that you want to buy.
Our Cisco 350-401 Exam Reviews exam questions are often in short supply.
With 350-401 Exam Reviews practice materials, you don't need to spend a lot of time and effort on reviewing and preparing. For everyone, time is precious. Office workers and mothers are very busy at work and home; students may have studies or other things. Using 350-401 Exam Reviews guide questions, you only need to spend a small amount of time to master the core key knowledge, pass the 350-401 Exam Reviews exam, and get a certificate.
Once it is time to submit your exercises, the system of the 350-401 Exam Reviews preparation exam will automatically finish your operation. After a several time, you will get used to finish your test on time.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
Hence Python Institute PCAP-31-03 dumps are a special feast for all the exam takers and sure to bring them not only Python Institute PCAP-31-03 exam success but also maximum score. We sincerely hope that you can pay more attention to our Microsoft MS-102-KR study questions. You just need to spend about twenty to thirty hours before taking the real Microsoft DP-700 exam. WGU Web-Development-Applications - To avoid being washed out by the artificial intelligence, we must keep absorbing various new knowledge. Without voluminous content to remember, our Adobe AD0-E608-KR practice materials contain what you need to know and what the exam want to test, So our Adobe AD0-E608-KR real exam far transcend others in market.
Updated: May 28, 2022