As long as you can practice 350-401 Exam Sample study guide regularly and persistently your goals of making progress and getting certificates smoothly will be realized just like a piece of cake. For our pass rate of our 350-401 Exam Sample practice engine which is high as 98% to 100% is tested and praised by our customers. You can trust in our quality of the 350-401 Exam Sample exam questions and you can try it by free downloading the demos. If you believe in our products this time, you will enjoy the happiness of success all your life Our 350-401 Exam Sample learning quiz is the accumulation of professional knowledge worthy practicing and remembering, so you will not regret choosing our 350-401 Exam Sample study guide. In the 21st century, all kinds of examinations are filled with the life of every student or worker.
CCNP Enterprise 350-401 The free demo has three versions.
With our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Sample learning braindumps, you can not only get the certification but also learn a lot of the professional knowledge. Where is a will, there is a way. And our Sample 350-401 Questions Answers exam questions are the exact way which can help you pass the exam and get the certification with ease.
Prior to your decision on which 350-401 Exam Sample exam questions to buy, please inform us of your email address on the 350-401 Exam Sample study guide so that we can make sure that you can have a try on the free demos of our 350-401 Exam Sample practice materials. We hope that the 350-401 Exam Sample learning braindumps you purchased are the best for you. And you can free download all of the three versions to have a fully understanding and feeling.
The hit rate of Cisco 350-401 Exam Sample study engine is very high.
Goldmile-Infobiz is a convenient website to provide service for many of the candidates participating in the IT certification exams. A lot of candidates who choose to use the Goldmile-Infobiz's product have passed IT certification exams for only one time. And from the feedback of them, helps from Goldmile-Infobiz are proved to be effective. Goldmile-Infobiz's expert team is a large team composed of senior IT professionals. And they take advantage of their expertise and abundant experience to come up with the useful training materials about 350-401 Exam Sample certification exam. Goldmile-Infobiz's simulation test software and related questions of 350-401 Exam Sample certification exam are produced by the analysis of 350-401 Exam Sample exam outline, and they can definitely help you pass your first time to participate in 350-401 Exam Sample certification exam.
By devoting in this area so many years, we are omnipotent to solve the problems about the 350-401 Exam Sample learning questions with stalwart confidence. we can claim that only studing our 350-401 Exam Sample study guide for 20 to 30 hours, then you will pass the exam for sure.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Cisco Juniper JN0-460 is a certification exam which is able to change your life. Learning with our The Open Group OGEA-101 learning guide is quiet a simple thing, but some problems might emerge during your process of The Open Group OGEA-101 exam materials or buying. Generally, if you use Goldmile-Infobiz's targeted review questions, you can 100% pass Cisco certification Adobe AD0-E137 exam. Secondly, the quality of our SAP C_CPI_2506 study guide is high. The our Goldmile-Infobiz Cisco SAP C_S4CS_2508 exam training materials, the verified exam, these questions and answers reflect the professional and practical experience of Goldmile-Infobiz.
Updated: May 28, 2022