To keep with the fast-pace social life, we make commitment to all of our customers that we provide the fastest delivery services on our 350-401 Exam Sample study guide for your time consideration. As most of the people tend to use express delivery to save time, our 350-401 Exam Sample preparation exam will be sent out within 5-10 minutes after purchasing. As long as you pay at our platform, we will deliver the relevant 350-401 Exam Sample exam materials to your mailbox within the given time. After years of operation, our platform has accumulated a wide network of relationships, so that we were able to learn about the changes in the exam at the first time. This is a benefit that students who have not purchased 350-401 Exam Sample exam guide can't get. Our passing rate is 98%-100% and our 350-401 Exam Sample test prep can guarantee that you can pass the exam easily and successfully.
The 350-401 Exam Sample training materials are so very helpful.
As is known to us, there are three different versions about our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) guide torrent, including the PDF version, the online version and the software version. PDF, APP and Software, each version has its advantage, and each version is the most effect way. You can choose the most suitable version to learn.
You can contact with our service, and they will give you the most professional guide. Our 350-401 Exam Sample study materials are the accumulation of professional knowledge worthy practicing and remembering. There are so many specialists who join together and contribute to the success of our 350-401 Exam Sample guide quiz just for your needs.
Cisco 350-401 Exam Sample - So their perfection is unquestionable.
Our 350-401 Exam Sample practice engine with passing rate up to 98 percent can build a surely system to elude any kind of loss of you and help you harvest success effortlessly. We are in dire to help you conquer any questions about 350-401 Exam Sample training materials emerging during your review. If you want to be accepted as an indispensable member in your working condition, and obliterate opponents from a great distance, start by using our 350-401 Exam Sample exam prep to pass the 350-401 Exam Sample exam now.
Our experts have taken your worries seriously. They have made it easy to operate for all people.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
A. Type 1 hypervisor enables other operating systems to run on it
B. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS
C. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
D. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques
Answer: B
Explanation:
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server.
Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures.
Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and
Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
Just visualize the feeling of achieving success by using our Fortinet FCSS_NST_SE-7.4 exam guide,so you can easily understand the importance of choosing a high quality and accuracy Fortinet FCSS_NST_SE-7.4 training engine. When the interface displays that you have successfully paid for our ISQI CTFL-UT study materials, our specific online sales workers will soon deal with your orders. On the other side, Products are purchasable, knowledge is not, and our Microsoft DP-600 practice materials can teach you knowledge rather than charge your money. Amazon SAP-C02 - These professional knowledge will become a springboard for your career, help you get the favor of your boss, and make your career reach it is peak. We can make sure the short time on Microsoft AZ-900-KR training engine is enough for you to achieve the most outstanding result.
Updated: May 28, 2022