Also you can ask us any questions about 350-401 Exam Simulator exam any time as you like. If you feel unconfident in self-preparation for your 350-401 Exam Simulator test and want to get professional aid of questions and answers, Goldmile-Infobiz 350-401 Exam Simulator test questions materials will guide you and help you to pass the certification exams in one shot. If you want to know our 350-401 Exam Simulator test questions materials, you can download our free demo now. So you can buy our 350-401 Exam Simulator actual test guide without any misgivings. If you have any questions, please you contact us online through the email. 350-401 Exam Simulator study guide is the best product to help you achieve your goal.
CCNP Enterprise 350-401 The knowledge you have learned is priceless.
CCNP Enterprise 350-401 Exam Simulator - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) As long as you never give up yourself, you are bound to become successful. With the help of our hardworking experts, our 350-401 Valid Test Test exam braindumps have been on the front-front of this industry and help exam candidates around the world win in valuable time. With years of experience dealing with exam, they have thorough grasp of knowledge which appears clearly in our 350-401 Valid Test Test actual exam.
So you need our timer to help you on 350-401 Exam Simulator practice guide. Our timer is placed on the upper right of the page. The countdown time will run until it is time to submit your exercises of the 350-401 Exam Simulator study materials.
Cisco 350-401 Exam Simulator - Stop hesitating.
Elaborately designed and developed 350-401 Exam Simulator test guide as well as good learning support services are the key to assisting our customers to realize their dreams. Our 350-401 Exam Simulator study braindumps have a variety of self-learning and self-assessment functions to detect learners’ study outcomes, and the statistical reporting function of our 350-401 Exam Simulator test guide is designed for students to figure out their weaknesses and tackle the causes, thus seeking out specific methods dealing with them. Most of them give us feedback that they have learned a lot from our 350-401 Exam Simulator exam guide and think it has a lifelong benefit. They have more competitiveness among fellow workers and are easier to be appreciated by their boss. In fact, the users of our 350-401 Exam Simulator exam have won more than that, but a perpetual wealth of life.
Would you like to distinguish yourself in IT industry? And would you like to get much more professional recognition? Come on and sign up for Cisco 350-401 Exam Simulator certification exam to further improve your skills. Goldmile-Infobiz can help you achieve your wishes.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
Therefore, we should formulate a set of high efficient study plan to make the Huawei H19-473_V1.0 exam dumps easier to operate. The Cisco 700-246 exam software designed by our Goldmile-Infobiz will help you master Cisco 700-246 exam skills. Cisco 300-415 - According to a recent report, those who own more than one skill certificate are easier to be promoted by their boss. To help you pass Salesforce Analytics-Con-301 exam is recognition of our best efforts. ServiceNow CAD - This is a fair principle.
Updated: May 28, 2022