350-401 Exam Test - Cisco 350-401 Latest Dumps - Implementing Cisco Enterprise Network Core Technologies 350-401 Encor - Goldmile-Infobiz

You will be respected by your colleagues, your boss, your relatives, your friends and the society. All in all, buying our 350-401 Exam Test test prep can not only help you pass the exam but also help realize your dream about your career and your future. So don’t be hesitated to buy our 350-401 Exam Test exam materials and take action immediately. As long as you choose our 350-401 Exam Test exam questions, you will get the most awarded. We can provide absolutely high quality guarantee for our 350-401 Exam Test practice materials, for all of our 350-401 Exam Test learning materials are finalized after being approved by industry experts. Second, they are well-known in this line so their quality and accuracy is unquestionable that everyone trusts with confidence.

CCNP Enterprise 350-401 Try to immerse yourself in new experience.

Our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Test guide prep is priced reasonably with additional benefits valuable for your reference. Every 350-401 Latest Exam Preparation exam questions are going through rigid quality check before appearing on our online stores. So you do not need to worry about trivial things and concentrate on going over our 350-401 Latest Exam Preparation exam preparation.

We claim that you can be ready to attend your exam after studying with our 350-401 Exam Teststudy guide for 20 to 30 hours because we have been professional on this career for years. We can’t deny that the pursuit of success can encourage us to make greater progress. Just as exactly, to obtain the certification of 350-401 Exam Test exam braindumps, you will do your best to pass the according exam without giving up.

Cisco 350-401 Exam Test - And we will let you down.

Our 350-401 Exam Test study materials selected the most professional team to ensure that the quality of the 350-401 Exam Test learning guide is absolutely leading in the industry, and it has a perfect service system. The focus and seriousness of our study materials gives it a 99% pass rate. Using our products, you can get everything you want, including your most important pass rate. 350-401 Exam Test actual exam is really a good helper on your dream road.

To understand our 350-401 Exam Test learning questions in detail, just come and try! Our 350-401 Exam Test real quiz boosts 3 versions: the PDF, the Softwate and the APP online which will satisfy our customers by their varied functions to make you learn comprehensively and efficiently.

350-401 PDF DEMO:

QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.

QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 3
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID

QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

SAP C_BCBTM_2509 - Perhaps our research data will give you some help. Cisco 300-410 - Many people want to be the competent people which can excel in the job in some area and be skillful in applying the knowledge to the practical working in some industry. CIPS L4M4 - The acquisition of Cisco qualification certificates can better meet the needs of users' career development, so as to bring more promotion space for users. Saving the precious time users already so, also makes the CIPS L5M8 quiz torrent look more rich, powerful strengthened the practicability of the products, to meet the needs of more users, to make the CIPS L5M8 test prep stand out in many similar products. PMI PMP-KR - With our users all over the world, you really should believe in the choices of so many people.

Updated: May 28, 2022