Some practice materials keep droning on the useless points of knowledge. In contrast, being venerated for high quality and accuracy rate, our 350-401 Exam Topics training quiz received high reputation for their efficiency and accuracy rate originating from your interests, and the whole review process may cushier than you have imagined before. Numerous of our loyal customers wrote to us to praise that the 350-401 Exam Topics exam questions are the same with the real exam questions and they passed 350-401 Exam Topics exam with ease. Our company has always been following the trend of the 350-401 Exam Topics certification. Our research and development team not only study what questions will come up in the 350-401 Exam Topics exam, but also design powerful study tools like exam simulation software. If you haplessly fail the 350-401 Exam Topics exam, we treat it as our responsibility then give you full refund and get other version of 350-401 Exam Topics practice material for free.
CCNP Enterprise 350-401 Moreover, we have Demos as freebies.
If you want to choose this certification training resources, Goldmile-Infobiz's Cisco 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Topics exam training materials will be the best choice. We believe that you will like our products. According to the different demands from customers, the experts and professors designed three different versions for all customers.
The certification of Cisco 350-401 Exam Topics exam is what IT people want to get. Because it relates to their future fate. Cisco 350-401 Exam Topics exam training materials are the learning materials that each candidate must have.
Cisco 350-401 Exam Topics - What should we do? It doesn't matter.
Our 350-401 Exam Topics preparation practice are highly targeted and have a high hit rate, there are a lot of learning skills and key points in the exam, even if your study time is very short, you can also improve your 350-401 Exam Topics exam scores very quickly. Even if you have a week foundation, I believe that you will get the certification by using our 350-401 Exam Topics study materials. We can claim that with our 350-401 Exam Topics practice engine for 20 to 30 hours, you will be ready to pass the exam with confidence.
To prepare for 350-401 Exam Topics exam, you do not need read a pile of reference books or take more time to join in related training courses, what you need to do is to make use of our Goldmile-Infobiz exam software, and you can pass the exam with ease. Our exam dumps can not only help you reduce your pressure from 350-401 Exam Topics exam preparation, but also eliminate your worry about money waste.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
EMC D-PCR-DY-01 - You are the best and unique in the world. The CompTIA 220-1102 exam certification is an important evidence of your IT skills, which plays an important role in your IT career. Not only we offer the best Pennsylvania Real Estate Commission RePA_Sales_S training prep, but also our sincere and considerate attitude is praised by numerous of our customers. Without complex collection work and without no such long wait, you can get the latest and the most trusted Amazon AWS-Developer-KR exam materials on our website. You will come across almost all similar questions in the real Salesforce MC-101 exam.
Updated: May 28, 2022