We put high emphasis on the protection of our customers’ personal data and fight against criminal actson our 350-401 Exam Tutorial exam questions. Our 350-401 Exam Tutorial preparation exam is consisted of a team of professional experts and technical staff, which means that you can trust our security system with whole-heart. As for your concern about the network virus invasion, 350-401 Exam Tutorial learning materials guarantee that our purchasing channel is absolutely worthy of your trust. They are the versions of the PDF, Software and APP online. If you visit our website on our 350-401 Exam Tutorial exam braindumps, then you may find that there are the respective features and detailed disparities of our 350-401 Exam Tutorial simulating questions. Knowledge is defined as intangible asset that can offer valuable reward in future, so never give up on it and our 350-401 Exam Tutorial exam preparation can offer enough knowledge to cope with the exam effectively.
CCNP Enterprise 350-401 What is more, we offer customer services 24/7.
Our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Tutorial study materials capture the essence of professional knowledge and lead you to desirable results effortlessly. Through the trial you will have different learning experience, you will find that what we say is not a lie, and you will immediately fall in love with our products. As a key to the success of your life, the benefits that 350-401 Latest Test Fee exam guide can bring you are not measured by money.
It is evident to all that the 350-401 Exam Tutorial test torrent from our company has a high quality all the time. A lot of people who have bought our products can agree that our 350-401 Exam Tutorial test questions are very useful for them to get the certification. There have been 99 percent people used our 350-401 Exam Tutorial exam prep that have passed their exam and get the certification, more importantly, there are signs that this number is increasing slightly.
Cisco 350-401 Exam Tutorial - Just have a try and you will love them!
As long as you can practice 350-401 Exam Tutorial study guide regularly and persistently your goals of making progress and getting certificates smoothly will be realized just like a piece of cake. For our pass rate of our 350-401 Exam Tutorial practice engine which is high as 98% to 100% is tested and praised by our customers. You can trust in our quality of the 350-401 Exam Tutorial exam questions and you can try it by free downloading the demos.
If you believe in our products this time, you will enjoy the happiness of success all your life Our 350-401 Exam Tutorial learning quiz is the accumulation of professional knowledge worthy practicing and remembering, so you will not regret choosing our 350-401 Exam Tutorial study guide.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
Splunk SPLK-1002 - In the 21st century, all kinds of examinations are filled with the life of every student or worker. SAP C_S4CPB_2508 - We have special online worker to solve all your problems. I believe every candidate wants to buy Fortinet FCSS_NST_SE-7.4 exam materials that with a high pass rate, because the data show at least two parts of the Fortinet FCSS_NST_SE-7.4 exam guide, the quality and the validity. Our Adobe AD0-E607 learning guide allows you to study anytime, anywhere. The advantages of our CIPS L5M1 cram guide is plenty and the price is absolutely reasonable.
Updated: May 28, 2022