With our 350-401 Examcollection Vce practice exam, you only need to spend 20 to 30 hours in preparation since there are all essence contents in our 350-401 Examcollection Vce study materials. And there is no exaggeration that with our 350-401 Examcollection Vce training guide, you can get 100% pass guarantee. What's more, if you need any after service help on our 350-401 Examcollection Vce exam dumps, our after service staffs will always here to offer the most thoughtful service for you. They are quite convenient. In order to facilitate the wide variety of users' needs the 350-401 Examcollection Vce study guide have developed three models with the highest application rate in the present - PDF, software and online. Our 350-401 Examcollection Vce study materials can help you achieve your original goal and help your work career to be smoother and your family life quality to be better and better.
CCNP Enterprise 350-401 You can spend more time doing other things.
CCNP Enterprise 350-401 Examcollection Vce - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) That is to say that we can apply our App version on all kinds of eletronic devices, such as IPAD, computer and so on. Our company's experts are daily testing our 350-401 Reliable Exam Price study guide for timely updates. So we solemnly promise the users, our products make every effort to provide our users with the latest learning materials.
A lot of things can’t be tried before buying or the product trail will charge a certain fee, but our 350-401 Examcollection Vce exam questions are very different, you can try it free before you buy it. It’s like buying clothes, you only know if it is right for you when you try it on. In the same way, in order to really think about our customers, we offer a free trial version of our 350-401 Examcollection Vce study prep for you, so everyone has the opportunity to experience a free trial version of our 350-401 Examcollection Vce learning materials.
Our Cisco 350-401 Examcollection Vce actual test guide can give you some help.
As the talent competition increases in the labor market, it has become an accepted fact that the 350-401 Examcollection Vce certification has become an essential part for a lot of people, especial these people who are looking for a good job, because the certification can help more and more people receive the renewed attention from the leader of many big companies. So it is very important for a lot of people to gain the 350-401 Examcollection Vce certification. We must pay more attention to the certification and try our best to gain the 350-401 Examcollection Vce certification. First of all, you are bound to choose the best and most suitable study materials for yourself to help you prepare for your exam. Now we would like to introduce the 350-401 Examcollection Vce certification guide from our company to you. We sincerely hope that our study materials will help you through problems in a short time.
You can get what you want! You must believe that no matter what you do, as long as you work hard, there is no unsuccessful.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
Huawei H14-711_V1.0 - It will be very easy for you to pass the exam and get the certification. Snowflake GES-C01 - Anyway, after your payment, you can enjoy the one-year free update service with our guarantee. Linux Foundation CKS - Our {CertName} exam question is widely known throughout the education market. We have clear data collected from customers who chose our ASQ CSSBB practice braindumps, and the passing rate is 98-100 percent. After using our Adobe AD0-E124 study dumps, users can devote more time and energy to focus on their major and makes themselves more and more prominent in the professional field.
Updated: May 28, 2022